Troubleshooting Machine fails to operate: Power turned off Machine overheats: Air vents are blocked. Cable damaged The elektromotor hardly The extension cable is too The mains voltage is lower reaches maximum speed: thin and/or too long than 230 V The machine has been overloaded. Apply the machine to the workpiece only when switched on Never use the machine for grinding magnesium workpieces. Start the machine by pressing the “Lock off” button and switch on the machine. Move the machine during roughing under an angle of 30º – 40º across the workpiece. Carefully inspect the machine and grinding disc before switching the machine on again. USE Special attention when starting the machine Clamp the workpiece and make sure that the workpiece cannot slide from under the machine during the cutting activities.
The machine is a powercraft ‘pag 230/2100k’. Pro Carpenter Posts: 22661 Joined: Sat Dec 16, 2006 10:11 pm Location: redhill surrey an auld reekie laddie Has thanked: 698 times Been thanked: 2147 times Re: Angle grinder – replacement parts Post. Powercraft is indeed owned by aldi, tools were made by several companies, and badged as powercraft.
Powerful 1500w motor No load speed 4,500 RPM Equipped with laser and parallel guide for accurate cutting Base plate tilts 45 degrees for precise angled cuts Spindle lock for quick & easy blade change Comes complete with 185mm TCT saw blade with 24 teeth Boxed and complete with user manual. Powerful 2100W motor 240 volt No load speed 6000 RPM Spindle thread M14 Spindle lock Adjustable disc guard Soft start for safer & more accurate cutting Disc size 230mm Includes safety goggles Boxed and complete with user manual. BRAND NEW POWER CRAFT 230MM CUTTING DISCS. 3 Discs for cutting stone / masonry 7 discs for cutting metal.
undefined
