High performance cutting guards for professional dust free concrete cutting applications on the toughest jobsites. Available in 230mm to fit most DEWALT angle grinders they allow users to plunge cut into all materials accurately with built-in depth control.
We will exchange or refund within the first 30 days if a manufacturers fault is found with this product. To claim the full warranty a registration form may need to be completed – please check the paperwork enclosed with this product when purchased. For any technical enquiries relating to this product it is best to call the manufacturer, Bosch Professional, direct on 0344 736 0109.
230mm angle grinder guard Related Question:
What is the guard for on a angle grinder?
Shown above is a typical angle grinder. Wheel guards serve to deflect sparks and debris away from users, and to shield and protect them from abrasive cutting and grinding wheels, which can cause serious damage if (when) they fail and fly off.
How deep can a 230mm angle grinder cut?
A 230mm angle grinder has a maximum cutting depth of approximately 65-70mm in one go.
What is a Type 1 guard on an angle grinder?
Type 1 is for grinding, type 1a is for cutting. Type 27 is for grinding, type 27a if for cutting. Same rule applies, use the larger guard for the Type 27 wheels (Or depressed wheels) Use the smaller guard for type 1 wheels.
What PPE is required when using a grinder?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) to protect against flying particles. Gloves, aprons, metatarsal safety boots, hearing protection, and respiratory protection may be required, depending on the work. Ensure the floor around the work area is clean.
Should you wear gloves when using an angle grinder?
Yes you should wear gloves when using an angle grinder. Angle grinders are a dangerous tool, and you should wear gloves, eye protection, and hearing protection when you use them.
Where should a grinder guard be placed?
Position the blade guard at the back towards your body. Use a smooth back and forth motion to guide the flap disc over the material. Let the wheel do the work, but feel free to apply enough pressure to ensure you’re being productive.
Is it OK to use a cut-off wheel as a grinder wheel?
NEVER attach a Type 1 straight or cut-off wheel to this angle grinder. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury.
Can an angle grinder cut through concrete?
Concrete cutting is a common task at the construction area, such as cutting concrete floor, concrete wall, concrete slabs and concrete pavers. Although the various concrete cutting saw is available, an angle grinder is the most convenient tool for small concrete cutting work.
How deep can a 125mm angle grinder cut?
All in all, 125mm angle grinders are extremely versatile tools despite their limited cutting depth of just 38 mm. While 115mm angle grinders offer a maximum cutting depth of only 30 mm, they are precise, easy to handle and lighter than larger versions.
Are 9 inch grinders banned?
Caution: 9 inch (230 mm) angle grinders have been banned on some work sites due to the increased risk of injury. The increased power and size of the unit will cause more severe kickback and gyroscopic effects (i.e. makes the grinder difficult to manoeuvre).
What is a Type 27 angle grinder guard?
Explanation: Type 27 & 28 guards are open on the bottom to allow for side grinding with raised hub/depressed center wheels. When side grinding with the Type 27 or Type 28 wheel, the work piece acts as a portion of the guard, protecting the operator in the event of a wheel breakage.
How much of a grinding wheel should be covered by the guarding system?
Maintain 6 mm (1/4 in.) wheel exposure with a tongue guard or a movable guard. Check that wheels have blotters on each side. Check the wheel fits properly to the spindle when mounting.
What is the difference between a Type 1 and Type 27 cutting wheel?
The Type 27 Cut Off Wheel must be used with an appropriate guard and a depressed center back flange. The center hub protects the user from cutting too deeply. The hub also allows for avoiding reinforcement wear and for extra rigidity for additional safety. The Type 27 produces 20% less cuts than the Type 1 on average.
What can you not do with an angle grinder?
Angle Grinder Use Angle grinders generate sparks. When required obtain a hot work permit before use. Keep work area clear of debris and flammable materials. Do NOT use in areas where there is grain dust or other combustible dust accumulation.
What are most angle grinder injuries from?
Most angle grinder injuries are from metal particles lodging in the operator’s eye. However, the most serious injuries are from kick-back, where the disc is thrust back violently towards the operator. Angle grinders used with cutting discs expose workers to a range of severe additional hazards.
