Skip to content Cutting guide with dust extraction outlet 300 mm. Fits on GWS 24-300 J Professional; GWS 24-3000. Wheel guards serve to deflect sparks and debris away from users, and to shield and protect them from abrasive cutting and grinding wheels, which can cause serious damage if (when) they fail and fly off. OSHA regulations require the use of guarding on angle grinders. Unique universal positioning design is fully adjustable. Frame/shield is mounted and supported by a heavy duty arm and swivel clamp thus allowing the operator to “custom fit” each guard as to overall length, angle, and position of shield. Cutting guards can come in open bottom design which is a common guard’s shape when you buy an angle grinder. This first type is often used for cut-off discs and is suitable for grinding. NEVER attach a Type 1 straight or cut-off wheel to this angle grinder. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury. Angle grinders discs are interchangeable, which means you can select the specific size of disc for your grinder and the specific type of disc for the type of material you are looking to cut or grind. There is a wide range of different types of discs available for an angle grinder. All grinding machines shall be supplied with sufficient power to maintain the spindle speed at safe levels under all conditions of normal operation. Guarding. Grinding machines shall be equipped with safety guards in conformance with the requirements of American National Standards Institute, B7. But for quick, rough cuts, it’s hard to beat a grinder. I’ve used an angle grinder to cut rebar (Photo 3), angle iron, rusted bolts (Photo 4) and welded wire fencing. Use an inexpensive cutoff wheel for these and other metal-cutting tasks. Yes you should wear gloves when using an angle grinder. Angle grinders are a dangerous tool, and you should wear gloves, eye protection, and hearing protection when you use them. In reality, the wheels on a car are similar to the flanges on a grinder because they both transmit rotation from a shaft to another component. On a car, the wheels link the drive axles to the tires, while on a grinder, the flanges link the arbor to the grinding wheel. Explanation: Type 27 & 28 guards are open on the bottom to allow for side grinding with raised hub/depressed center wheels. When side grinding with the Type 27 or Type 28 wheel, the work piece acts as a portion of the guard, protecting the operator in the event of a wheel breakage. Type 27 Wheel – A saucer/center depressed shaped wheel intended for grinding on the face of the wheel used with angle grinders fitted with the appropriate guard. The Type 27 Cut Off Wheel must be used with an appropriate guard and a depressed center back flange. The center hub protects the user from cutting too deeply. The hub also allows for avoiding reinforcement wear and for extra rigidity for additional safety. The Type 27 produces 20% less cuts than the Type 1 on average. Clue is in the title, a cutting disc is thin and used for cutting and a grinding disc is much thicker and used for grinding not cutting. Diamond blades have very high resistance and cause less heat during usage. The diamond blade can absorb more heat than other blades and is perfect to use with an angle grinder. Cutting-off wheels are thin by design and do not have adequate lateral strength for side grinding. The fiberglass reinforcement is in the wheel to add strength. Using the side of the wheel can damage the fiberglass. This reduces the strength of the wheel and can lead to breakage.300mm angle grinder guard Related Question:
Does an angle grinder need a guard?
Are grinder guards universal?
What is a Type 1 angle grinder guard?
Is it OK to use a cut-off wheel as a grinder wheel?
Are angle grinder blades interchangeable?
Does OSHA require guards on grinders?
Is it hard to use an angle grinder?
Should you wear gloves when using an angle grinder?
What grips the grinding wheel?
What is a Type 27 angle grinder guard?
What is a Type 27 angle grinder?
What is the difference between a Type 1 and Type 27 cutting wheel?
What is the difference between a cutting disc and a grinding disc?
Can I use a diamond blade on a grinder?
Why I shouldn’t use a cutting wheel to grind with?