bosch 41/2 angle grinder Related Question:

Does Bosch make a good angle grinder?

Bosch GWS18V-45 Angle Grinder The Bosch GWS18V-45 is not just one of the better Bosch angle grinders, it’s one of the best angle grinders on the market period. To begin, the 18V motor packs a huge punch, providing it with more than enough power for even the toughest jobs.

How do I know if my Bosch grinder is real?

To verify whether the product is genuine, first check the holographic properties of the Bosch Secure Code Label. For genuine Bosch products, the secure code and logo on the Bosch Secure Code Label should glimmer in rainbow colours when it is exposed to direct light.

Where are Bosch grinders made?

Talked to the Fein rep the other day and their grinders, tools are made in Germany as well.

How deep can a 4.5 inch angle grinder cut?

A 4.5 angle grinder has a blade that is 4.5-inches in diameter. This means the blade extends 2.25-inches for the center in each direction. As a result, it is not physically able to cut through 4 inch concrete. Select a larger grinder when a deep cuts are necessary, such as a 9-inch grinder.

Will an angle grinder cut concrete?

Concrete cutting is a common task at the construction area, such as cutting concrete floor, concrete wall, concrete slabs and concrete pavers. Although the various concrete cutting saw is available, an angle grinder is the most convenient tool for small concrete cutting work.

Are Bosch tools made in Germany?

Bosch is a German power tool manufacturer, and some of their tools and products are still manufactured in Germany, as well as in Switzerland. However, many of their components are now manufactured in Malaysia, Mexico, Taiwan, and China.

Where is the part number on a Bosch injector?

The majority of diesel injectors are made by Bosch and the part number is usually found on the pin connector unit above the O ring , however on some injectors they will be on the main body.

What is the most popular size angle grinder?

The most commonly used sizes are the 4” and 4 ½”. These grinders typically have the capacity for wheel diameters of up to 7”, with particularly small versions having the capacity for 3” discs.

Can you cut tile with an angle grinder?

Angle grinders are ideal for cutting tile that’s fixed to a wall or cutting special shapes, such as circles or squares, at the center of pieces of tile. We have the tools to make your job easier. For one-off projects and quick home renovations, consider our tile saw rentals.

How many amp angle grinder do I need?

Five or six amps is common on mid-range angle grinders, but some are as high as 11 amps. Larger models can reach 14 amps, which is a practical limit since standard electrical outlets only provide a 15-amp maximum supply. Some heavy-duty angle grinders use horsepower instead.

Is Bosch a Chinese company?

listen)), commonly known as Bosch, is a German multinational engineering and technology company headquartered in Gerlingen. The company was founded by Robert Bosch in Stuttgart in 1886.

Is Bosch products made in China?

Depending on the specification required, source of raw materials and human capacity, the Bosch factory in China may be used to develop some tools. You should however know that there are other Bosch factories in the world, example of some locations include Scintilla, Stuttgart, Penang, India, etc.

Can I use bigger disc on angle grinder?

Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.

Can an angle grinder cut paving slabs?

Cutting Pavers With a Circular Saw or Angle Grinder Both a standard circular saw (7 1/2-inch blade) or angle grinder (4 1/2-inch blade) make clean, easy cuts and involve similar techniques. In either case, be sure to use a diamond blade made for masonry and stone.

How do I keep dust out of my angle grinder?

If no dust extraction is available for drilling or grinding, running a water hose onto the surface or holding a vacuum up to the tool will keep dust down. Use a drill dust attachment by turning the vacuum on and sticking the attachment to the surface. The suction from the vacuum should hold it in place.

Leave a Reply

Your email address will not be published. Required fields are marked *