Here are seven types of angle grinder discs and their different uses. “In this guide, you’ll learn about seven of the most popular angle grinder discs and their primary uses. This guide will also highlight what many of these discs are made from, which in turn will help you evaluate whether that type can be safely used on your targeted material.” “Diamond discs come in several forms. However, most diamond discs on the market today are cutting discs by nature. Not only that, but diamond discs provide top-tier cutting capacity for jobs that involve extra-dense metal stock.”
Get the most out of your angle grinder by using different types of angle grinder wheels. The most apparent disc and probably the most popular one among different types of angle grinder discs is the grinding disc. Similar to other angle grinder discs, wire wheels are produced in different shapes and sizes because they are used for different purposes.
Let’s check out the different types of angle grinder discs and their uses. An angle grinder disc is any disc designed to fit in an angle grinder and rotates at high speed to perform cutting and polishing operations. These types of angle grinder discs are often used in autobody shops, metalworking, and fabrication industries.
If you’re doing fabrication, you need four types of wheels for your angle grinder. We buy angle grinder grinding wheels 5-10 at a time and that quantity can do most of the typical fabrication projects on a single truck. “The best angle grinder cutting wheels for metal are also the thinnest. However, the thinner the wheel, the more dangerous they are. Thin cutting wheels flex more easily and thus shatter more easily. If you’re working at a work bench in a comfortable position with a well-positioned workpiece, a thin cutoff wheel is fine. If you plan to work under a vehicle in an awkward position, we recommend using a 1/8” cutoff wheel that is a little more rigid and will resist shattering if you lose your balance or position.
Metal cutting discs are made of treated abrasives that in their bonded form are harder than the metal or steel you are likely cutting. DIFFERENCE IN METAL CUTTING DISCS. Some metal cutting disc brands have been around for many years and are so widely distributed they are assumed to be the best products. CHOOSING A METAL CUTTING DISC. Metal cutting disc size is relatable to the tool you are using.
what angle grinder disc for metal Related Question:
Can I use angle grinder to cut metal?
An angle grinder is a power tool that can be used for different projects. You can cut metal, aluminium, concrete, bricks, pavers, wood, and other dense materials; you can sand and polish different surfaces to sharpen tools and grind materials.
What type of angle grinder disc do I need?
The two most common disc sizes are 4.5” (115mm) and 9” (230mm). Grinders with larger discs are particularly well suited to heavy-duty applications, whereas those with smaller discs are ideal for finer work.
How thick should a metal cutting disc be?
Cutting discs are best for cutting through metal and are available in different thicknesses as explained below. For standard, everyday jobs on stainless or mild steel, opt for a 1mm or 1.6mm disc thickness. For cutting thin sheet metals, choose a 1mm or 0.8mm disc.
What is the best blade for cutting metal?
We recommend using a diamond blade that’s labeled as a ferrous-metal-cutting blade, but many tradespeople use a regular masonry diamond blade with good results.
Do all discs fit all angle grinders?
Angle grinders discs are interchangeable, which means you can select the specific size of disc for your grinder and the specific type of disc for the type of material you are looking to cut or grind. There is a wide range of different types of discs available for an angle grinder.
Can I use bigger disc on angle grinder?
Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.
What type of disc do we use to grind steel?
Angle Grinder Wheel/Discs The most apparent disc and probably the most popular one among different types of angle grinder discs is the grinding disc.
What are metal grinding discs made of?
Silicon carbide/aluminum oxide blend: A wheel made from a blend of silicon carbide and aluminum oxide provides ideal grinding for aluminum and other soft alloys. These grains offer extended life spans and fast, consistent cut rates on aluminum and other soft metals.
What is the difference between cutting disc and grinding disc?
Clue is in the title, a cutting disc is thin and used for cutting and a grinding disc is much thicker and used for grinding not cutting.
Can I use a stone cutting disc on metal?
Stone cutting discs will actually cut metal but they will tend to tear up and fall apart as they chop their way through and due to this the flying debris can cause a great deal of harm and damage to yourself, others around you and also to any nearby objects.
What are thick grinding discs for?
Grinding discs are perfect for use on metal or stone. One side of the metal disc is finished with abrasive grains which can be used to grind off rust or paint. Grinding discs can also be employed in the preparation of stone and metal surfaces.
What is the best TPI for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
Can I put a metal cutting blade on my miter saw?
Although mitre saws were traditionally used for cutting wood, with the correct blade they can make light work of cutting through steel and aluminium profiles at an angle.
Is there anything an angle grinder can’t cut?
The inspiration behind this creation is the natural defense mechanisms used by shells, grapefruit skins, and fish scales that makes them resistant from the attacks of various sea creatures. The material, named Proteus, cannot be cut using either angle grinders, drills, or high-pressure water jets.
