We have hardwood floors buried under decades old linoleum, foam padding and groovy floral carpeting. The same linoleum was on top of wood on the kitchen counter. We removed most of the junk with a scraping blade and we were pulling our hair out trying too figure out how to get the rest of the crud off of our wood when we came across a video for the Diamabrush products.
which angle grinder to use with diamabrush Related Question:
What grit is Diamabrush?
Do I need to sand after using the Diamabrush hardwood tool? Our tool contains 50 grit diamonds, and as such, we recommend following your typical sanding progression, depending on the hardness of the wood and your specific refinishing process.
Can you use an angle grinder to sand a deck?
Using a large angle grinder and coarse sanding discs to remove the old stain from a wood deck. If your porch or deck is looking a little worse for the wear, a good sanding might be in order.
What is Diamabrush?
PRODUCT DESCRIPTION: Get the fastest, most effective tool for removing stubborn coatings from wood. If your deck has years of weathered wood, failed coatings, or discoloration, the Diamabrush™ Wood, Decks, and Siding Tool can save time and money.
How do you strip paint off a deck?
Leave the paint stripper on the wood for 15 to 30 minutes or until the paint lifts or bubbles. Apply more stripper as needed to keep it wet during this time, then scrub the softened paint from the wood with a stiff-bristle brush or scrape it off with a paint scraper.
Can a Makita angle grinder be used as a sander?
When you need to remove or sand a lot of surface wood away, turning your angle grinder into a sander is the easiest and most cost effective way to do it. To turn your angle grinder into a sander you’re going to need some Flap Discs.
Can I use my angle grinder as a sander?
An angle grinder can be used as a sander if the disc on the grinder is made specifically for sanding. With the high velocity of speed that comes with using an angle grinder, a sanding disc can do twice the sanding capabilities in a shorter amount of time than a traditional sander.
Will pressure washer remove paint from deck?
Pressure washing is one way to remove paint from wood, metal, concrete, and other exterior surfaces. Because of the high pressure levels, it can be very efficient and can drastically cut the time to complete this task.
Is it better to paint or stain a deck?
While staining may take less time than painting, painting often does a better job of filling the cracks, covering imperfections, and provides longer lasting protection. Paint also is typically more rot resistance and does a better job of preventing mold and sun damage.
