In comparison, a Type 1 cutting wheel has a flat profile and increased cutting surface, allowing the operator to complete more cuts per wheel. Two specific applications for a Type 27 cutting wheel are flush cutting and rip cutting. No matter what type and style of cutting wheel an operator selects, understanding how that product is designed to be used and following some best practices for technique can help extend operator safety and product life, as well as maximize performance and results.
We got our Pro team together to give you some tips on how to use an angle grinder from basics to some advanced techniques and shortcuts. Additional Pro Tips on How to Use an Angle GrinderBefore applying the grinder to the work surface, allow the tool to reach full speed. If you’ve got any tips or tricks on how to use an angle grinder, feel free to leave your input in the comments section below!
You can buy very inexpensive angle grinder tool, but for frequent use or for demanding jobs like cutting stucco or cement, I’d recommend spending a little more for a grinder with a more powerful motor. Outfitted with a grinding wheel, an angle grinder is a great tool for restoring edges on rough-and-tumble tools like hoes, shovels and ice scrapers or for the initial grinding of axes, hatchets and lawn mower blades. Finally, with the grinder off, rest the grinding wheel against the blade and adjust the angle of the grinder to match the blade’s bevel.
We’d like to provide these safety tips with you so that you get the most out of these products while preventing any potential harm that can be caused to you or others by improper use of an angle grinder. “Each angle grinder comes with their own recommended disc sizes. Those guidelines are there for a reason. Imagine you have a 9″ x 1/8″ x 7/8″ Pipeline Cutting and Grinding Disc on a grinder that is built to use an abrasive wheel like a 4-1/2″ x 1/4 x 7/8” Grinding Disc. Unless you have a Metabo angle grinder with a special mechanism to tighten and release your discs, your angle grinder should have come with a special pin wrench.
An angle grinder is one of the most important welding prep supplies a weldercan have in a shop because grinders are versatile and extremely useful forquickly prepping or finishing welds. Common mishaps with an angle grinder include: sending sparks towards your face, getting your cut-off wheel stuck and getting jerked by the grinder, or getting too close to a moving disc. If you are looking for dual-purpose protection, plenty of welding helmets currently are outfitted with an easy-switch “Grind mode”.
Angle grinders are typically powered by an electric mounted, which is responsible for driving a flattened disc-shaped head. Whether you’re planning to use an angle grinder for recreational or commercial purposes you should follow these five essential safety tips to protect against bodily injury. Assuming your angle grinder has guards – which it should – it’s recommended that you adjust them prior to using the angle grinder. Don’t underestimate the importance of wearing impact-resistant goggles or glasses when using an angle grinder.
tips for using an angle grinder Related Question:
What should you not do with an angle grinder?
Angle Grinder Use Angle grinders generate sparks. When required obtain a hot work permit before use. Keep work area clear of debris and flammable materials. Do NOT use in areas where there is grain dust or other combustible dust accumulation.
What 3 things should be protected when using an angle grinder?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) to protect against flying particles. Gloves, aprons, metatarsal safety boots, hearing protection, and respiratory protection may be required, depending on the work.
Should you use gloves with angle grinder?
“Gloves should be well-fitted and provide good dexterity and the best possible protection against cut or abrasion and heat,” he said, adding that vibration resistant properties are also of benefit, specially on angle grinders that don’t have Milwaukee’s built in anti-vibration features.
Can you cut wood with an angle grinder?
The blade of an angle grinder is a grindstone that is used to polish or sharpen metal and stone; it cannot be used for cut- ting wood because it may burn and singe the wood by friction.
Should you wear gloves when using an angle grinder?
Yes you should wear gloves when using an angle grinder. Angle grinders are a dangerous tool, and you should wear gloves, eye protection, and hearing protection when you use them.
Can you use a cut off wheel on an angle grinder?
Usages. You can use cut-off discs for cutting metal bars, metal tubes and small pieces of metal sheets and plates. You can also cut out welds with them. For shortening the length of various bolts, it is also a good idea to use an angle grinder and a cut-off wheel.
Do angle grinder sparks hurt?
Conclusion. In summation, the sparks that result from cutting or grinding metal can be dangerous. Not only can they burn the eyes and skin, but they also can also ignite flammable materials such as wood, paper, or fabric causing a fire.
What causes grinder kickback?
Kickbacks. Kickback happens when the angle grinder suddenly thrusts back towards the operator as a result of it grabbing or jamming on the materials being worked on. They are common and kick back injuries have included severe cuts and injuries to hands, arms, legs, and the groin region, as well as facial injuries.
What are most angle grinder injuries from?
In 2008, nearly 25,000 were injured nationwide while using angle grinders (U.S. Consumer Product Safety Commission). The majority of these injuries occur from an abrasive blade shattering, diamond-blade segment loss, or the angle grinder kicking back.
Can you use water with an angle grinder?
So, Can You Use Water with an Angle Grinder? Absolutely! But not straight out of the box. With some accessories and a bit of knowledge on how to mitigate the risks, you can use an angle grinder with water to cut tile, brick, or any type of masonry to minimize dust and maximize blade life.
Are guards required on grinders?
Abrasive wheels used on bench and pedestal grinders must be equipped with safety guards. If the distance between the safety guard and the opening at the top of the wheel is greater than 1⁄4-inch, then an adjustable “tongue guard” to protect workers must be installed.
What gloves should you use with an angle grinder?
You want moderately heavy leather (or an abrasion-resistant alternative), and you want a good fit. Firstly, angle grinders aren’t very dangerous. Abrasive wheels can go through leather fairly quickly, but it takes a lot of force. The vast majority of hand contact will be quick and light.
When should you change cutting discs?
Always replace a cutting disc if it shows any signs of damage. This includes, but is not limited to visible cracks and chips or any signs of bending or twists to the wheel. Cut off wheels should be replaced when they hit their expiration date. This can be found imprinted on the metal center of the disc.
What PPE is required when using an angle grinder?
You are wearing appropriate PPE, including safety glasses (‘medium impact’ glasses as a minimum), face shield if required, dust mask, hearing protection, gloves and an apron to protect against sparks. The power tool runs smoothly, with no vibration or wobbling. (Let it run until it reaches full operation speed).
Is angle grinder loud?
Hand-held angle grinders can produce noise levels of about 90 to 115 dB(A).
