After nearly 40 years of using angle grinders my friend has told me that I’m putting cutting discs on the wrong way up. Never had a problem in all that time and do it the way I was shown by my foreman when I was 16. Could be him that’s wrong, but knowing my luck it’s probably me.
For the best results, ensure that the angle grinder stays tilted at a 90 degrees angle to the surface you’re cutting. You can also try to use a sliding/rocking motion still in the angle grinder cutting direction – move the cutting wheel into then through your workpiece instead of straight down. In addition to maintaining the correct angle grinder cutting direction all through, there are several good practices you should follow to maximize the performance of your grinder.
The cutting disc used in the angle grinder has the front and back requirements when installing. Let us see the installation steps of cutting disc for an makute angle grinder. Then install the cutting blade, install the external fixing nut of the angle grinder on the cutting blade and fix it tightly.
Get the most out of your angle grinder by using different types of angle grinder wheels. The most apparent disc and probably the most popular one among different types of angle grinder discs is the grinding disc. Similar to other angle grinder discs, wire wheels are produced in different shapes and sizes because they are used for different purposes.
An angle grinder is a hand-held power tool that can be used for a huge variety of different jobs including grinding, cutting, cleaning and polishing surfaces making it an essential tool to have in your arsenal. Before you start cutting, sanding or grinding perform a few practice runs across your item so that you know exactly how you need to hold the grinder and in what position it needs to be in. Use the Right Attachment: Use only grinding discs for grinding and cutting discs for cutting – essentially, only use a given disc or attachment for its intended use.
undefined
