An angle grinder can be used as a sander if the disc on the grinder is made specifically for sanding. FITS T29 ANGLE GRINDER: Angle grinder sanding disc can be used for universal applications, ranging from metal or woodworking, concrete grinding or finishing, stone smoothing so on. A grinder can be used as a sander whereas a sander cannot necessarily be used to grind material.
These discs are specifically designed for use on an angle grinder, and make sanding away lots of surface area a breeze. A single Tork Craft Flap Disc costs around R26.00 at Builders and hardware stores, and you’ll get far more out of a flap disc than you will a regular sanding disc. To use a flap disc to sand rough timber, gently stroke the angle grinder over the surface – starting with a low grit and working your way up to a 120-grit flap disc to finish off.
Two of the most universal tools out there are angle grinders and sanders. So when we compare angle grinders and sanders, we’ll be comparing the smaller portable models like palm and orbital sanders. Directly compared, angle grinders are much more dangerous than sanders.
By attaching an abrasive flap disc you can turn the angle grinder into a sander and use it for sanding wood, metal, welded joints etc. Keep in mind that you can use the angle grinder for sanding a wide variety of materials from wood and wooden floors to decking, metal, concrete, fiberglass, and more. If you are sanding larger surfaces, such as plywood or large planks, then a belt sander or a random orbital sander is a better tool for the job.
Learning how to use an angle grinder to sand wood is an easy and practical way to do this job. In this article, you’ll learn about how to sand wood with your angle grinder. Angle grinders work with several attachments, but a flap disc is what you need to sand wood.
Turning your angle grinder into a sander is the most convenient and cost-effective way to remove or sand a lot of surface wood. The discs are specifically designed for use on angle grinders, so sanding away a lot of surface area is easy. You can use a liquid paint-softening stripper if the scraper didn’t do the job or you wanted to save time.
can i use my angle grinder as a sander Related Question:
Is a grinder the same thing as a sander?
Sanders are only used to sand, but grinders can be used for multiple things. They can cut through metal, strip metal, and polish surfaces. Be aware of what your project entails before choosing which of these to rent. Maybe you need both or one.
What is the difference between an angle grinder and an angle sander?
The biggest difference between an angle grinder and a sander is the type of attachments that each of the tools uses. What is this? Angle grinders use rigid discs that come in a wide variety of types, each designed for a specific purpose. Sanders use – as their name suggests – sandpaper belts or pads.
Can you use an angle grinder to sand a deck?
Using a large angle grinder and coarse sanding discs to remove the old stain from a wood deck. If your porch or deck is looking a little worse for the wear, a good sanding might be in order.
Can a grinder sand wood?
An angle grinder does it all: Carving, Shaping and Sanding Wood. Only one tool in the world can comprehensively accomplish the three important tasks of woodworking namely- carving, shaping and sanding wood and that is an angle grinder.
What grit sandpaper should I use on my deck?
Use 60-150 grit sanding paper or discs will work best. Courser sanding paper could damage the wood further and finer sanding paper will take too long. Make sure the deck is clean and dry before sanding. Make sure you wear a mask when sanding your deck surface.
Can you cut plywood with an angle grinder?
Lastly, the one material I’d avoid cutting with an angle grinder is plywood, and that is with or without a 3-tooth cutting disc. You’re better off using a table saw or circular saw when attempting to cut plywood, especially if you’re ripping boards of plywood.
