The gas and coolant in the nebulizer can be changed, making it easy to use on different types of processing.
Chips from gas processing are blown away, making it safer to work. A lot of tools to help with water problems, and it’s easier to clean up.
Widely used: When there is no pressure coming out of the liquid, it is important to keep the air pressure in the range of 5-7KGF / CM2.
Not only does it speed up the cutting process, but it also saves time, money, and tool wear.
It doesn’t matter if the workpiece is made of a super-hard alloy. Precision machining can still make it look good.
NOTES.
The liquid must be clean before it is used, so it must be used.
2. Do not use liquids that are corrosive to your skin.
3. When there is no pressure coming out of the liquid, it is important to keep the air pressure in the range of 5-7KGF / CM2 (atomization and gas, associated gas pressure.
4. Use a liquid viscosity of at least 68cSt or less when you do this.
Products come in a range of sizes.
Two inches by one and a half inches.
About 1.5m of hos.
The package weighs 200g / 6.9oz.
Packages come with.
1 x Mist Coolant Spraye.
Features.
How big is it? 36.5cm (L.
About 1.5m of hose.
People made this with a mix of plastic and metal, as well as brass.
Fitment.
For an 8mm air pipe.
For CNC Lathe, Milling, and Drilling Machine.
A machine that cools stones, metal, and ceramic tiles.
I’m so happy I didn’t get a cheap one because I love it so much. Here’s a great tip. Take painters tape. I took it and taped the side that I wanted mounted, and taped the surface I wanted the unit mounted on. I then covered the back of both sides with dollartree super glue. I then stuck the tape together and stuck the tape to each other. This isn’t a bad idea. I use this on a CNC machine to mount aluminum stock on the work table and machine parts. When I’m done, I just peel the tape off one corner of the finished piece and all the surfaces are protected. Check it out on YouTube and look up cnc painters tape fixing with supper glue. It’s a great way to fix things. So I heated the blue plastic tube and stretched it until about 1 inch of the tube was big enough to fit over a pencil. It worked great, even though I only had 6mm blue plastic tube. And it can hold 120 pounds with no problems at all. Also, the dual adjusters are so flexible that you can make it do anything you want. You can make it do low air, low mist, medium air, less mist for less ventri liquid draw, huge air with infinitely ultra-light ventri liquid draw, and so on. The first thing I’m going to do is try the lightest liquid delivery method with the smallest mist. I’ll also look into how to make the liquid evaporate as soon as it lands on the hot cutter bit so that the evaporation will cause a refrigeration effect by releasing coldness from turning liquid into vapor and there will be no liquid mess to clean up, no coolant waste, and good chip clearing. It’s fun to show and tell if I’m really into something. This is going right into my toy box, boys and girls. Lol
