Angle grinders make excellent power sanding tools because of their powerful motor combined with precision and high RPM. Sanding discs for the angle grinder are generally circular discs embedded with abrasive material. While using the angle grinder as a buffing tool is good idea but its best to be used with experienced hands, the angle grinder are very powerful and could run up to 13,000 RPM, so its advisable to use a variable speed grinder for buffing and polishing jobs. Choose your attachments and discs to turn your angle grinder into a sander, polisher, buffer, grinder or a multi-material cutter.
Below are some most popular angle grinder attachments you should know about when using this tool for work. A sanding disc is among the essential angle grinder attachments. A minor drawback of this grinder attachment is that you can hardly disassemble it from the angle grinder.
best angle grinder accessories Related Question:
Can I use a wire brush on an angle grinder?
If it is important to minimize sparks, such as in a potentially flammable environment, a brass wire brush should be used. While it may be tempting to install a larger wheel on your angle grinder to get the job done more quickly, this is a bad, unsafe idea.
Can you buff with an angle grinder?
An angle grinder can be used as a polisher but there a few key points to keep in mind. Be sure to purchase a flap disc that has non-abrasive padding on the outer layers to ensure your grinder performs polishing in lieu of grinding. Always polish at low speeds if available.
What 3 things should be protected when using an angle grinder?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) to protect against flying particles. Gloves, aprons, metatarsal safety boots, hearing protection, and respiratory protection may be required, depending on the work.
What is the most popular size angle grinder?
The most commonly used sizes are the 4” and 4 ½”. These grinders typically have the capacity for wheel diameters of up to 7”, with particularly small versions having the capacity for 3” discs.
Will a wire brush remove rust?
Wire brushes are an excellent choice for the removal of rust and oxidations, paint, slag, weld splatter and other unwanted surface contaminants with angle grinders, bench grinders or drills.
What is a cup brush?
Cup brushes are used for removal of scale, rust, and paint, as well as for deburring and polishing. Different duty levels and fill materials are available to suit a wide variety of tasks in surface preparation, burr removal, and finishing operations.
Can you polish granite with an angle grinder?
When polishing the granite edge, move your angle grinder in short, vertical motions as you continue to go from left to right. At this point, the granite has been smoothed out and your goal is to make the edge as shiny as possible.
What should you not do with an angle grinder?
Angle Grinder Use Angle grinders generate sparks. When required obtain a hot work permit before use. Keep work area clear of debris and flammable materials. Do NOT use in areas where there is grain dust or other combustible dust accumulation.
Should you wear gloves with angle grinder?
“Gloves should be well-fitted and provide good dexterity and the best possible protection against cut or abrasion and heat,” he said, adding that vibration resistant properties are also of benefit, specially on angle grinders that don’t have Milwaukee’s built in anti-vibration features.
Should I wear gloves when grinding?
Never wear gloves with grinders. Or operate grinders with guards removed. By “grinders,” we mean abrasive belt grinders, bench grinders, pedestal grinders, surface grinders, and also abrasive cutoff machines.
How many amps should my angle grinder be?
Five or six amps is common on mid-range angle grinders, but some are as high as 11 amps. Larger models can reach 14 amps, which is a practical limit since standard electrical outlets only provide a 15-amp maximum supply. Some heavy-duty angle grinders use horsepower instead.
Can I use bigger disc on angle grinder?
Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.
Whats a good size for a grinder?
For instance, a 4.5-inch angle grinder is the most common size. It utilizes wheel discs that are 4.5 inches in diameter. A 7-inch grinder uses a 7-inch disc, and so on.
How deep can a 125mm angle grinder cut?
All in all, 125mm angle grinders are extremely versatile tools despite their limited cutting depth of just 38 mm. While 115mm angle grinders offer a maximum cutting depth of only 30 mm, they are precise, easy to handle and lighter than larger versions.
What is a 7 inch angle grinder used for?
Angle grinders are versatile tools that can grind metal and cut tile, stucco and pavers, rout out mortar, plus they can sand, polish and sharpen. Learn to use an angle grinder to cut tile, mortar and pavers; make quick work of rust and loose paint removal; sharpen blades and cut or grind steel.
