How to remove an angle grinder disc without the tool. How to remove an angle grinder disc the appropriate way. Now that I’ve shown you how to remove an angle grinder disc without the tool, I’m going to tell you how to do it with the appropriate tool.
If you have the specially designed disc-changing tool that came with your angle grinder, you can refer to our article on using this tool to change an angle grinder disc. Read our angle grinder reviews if you’re looking for a better grinding tool. There are many methods to remove an angle grinder disc without this tool.
The topic we will discuss today is how you can change angle grinder disc without tool and re-insert it correctly. Pick #2: how to remove angle grinder disk without tools. Suppose we discuss how to open a disc from an angle grinder without any equipment.
Remove the Angle Grinder DiscRemoving the Angle Grinder disc with factory keysYour new grinder comes with two separate keys that look like flat wrenches. Removing the Angle Grinder disc without keysUsing the palm of your hand, slide the disc in the direction opposite to the arrow on the disc. The main thing is that when changing a disc on a grinder, do not violate safety precautions and remove the disc with the angle grinder turned off.
If possible posts must include the make/model/year in the title or body of the post. If we feel a piece of advice is particularly reckless, dangerous, or extremely unhelpful it maybe removed If a post or comment is provided that is not a response to a question, the post may be removed. Do not post asking questions of your own in someone else’s post.
how to remove angle grinder disc without tool Related Question:
How do I get the disc off my angle grinder?
Using the palm of your hand, slide the disc in the direction opposite to the arrow on the disc. This should loosen the nut enough to remove it with your fingers. If that doesn’t work, you can use pliers to break the old disc into pieces, giving you better access to the drive bolt and retaining nut.
How do you unstick a grinder?
Do not crush it if you put the grinder head in a vise. You can use a rubber or plastic mallet to tap on the retaining ring. If it still won’t budge, get a torch and heat the retaining ring to expand, then tap sharply, but not too hard, with a light hammer.
What is the thread on an angle grinder?
“The “standard” spindle (sometimes called the “arbor”) thread these days on a angle grinder in the US is 5/8-11 (5/8″ diameter and 11 threads per inch).
How do I loosen my Makita angle grinder?
Place the lock not wrench onto the lock nut holding the disc in place. Turn the lock nut wrench counter-clockwise to loosen the lock nut.
Which is the first step in replacing a grinding wheel?
To change the grinding wheel, the operator shuts down the surface grinder with the controls on the front of the machine, removes the wheel guard (usually two hand knurled nuts) and proceeds to loosen the wheel retainer nut.
When should a grinder wheel be replaced?
If you do not know, a good “rule of thumb” is to discard the wheel when you are 1” away from the recess. Portable cup wheels must be discarded when the machine’s guard prevents proper grinding. In this case a proper guard will determine discard size by preventing additional grinding on the wheel’s rim.
How long do you leave your grinder in the freezer?
If you have a three or four piece grinder, keep it together and place it in the freezer for 20-30 minutes, this will help loosen the ground flower from the teeth and other metal parts.
