How to change angle grinder blade is important know-how that every user should have to operate their tool safely and properly. If you don’t have any available factory or improvised keys, you can still change your angle grinder blade by hand. Learning how to replace a blade on an angle grinder is crucial know-how for every user as this replacement will eventually happen one way or another.
Remove the Angle Grinder DiscRemoving the Angle Grinder disc with factory keysYour new grinder comes with two separate keys that look like flat wrenches. Removing the Angle Grinder disc without keysUsing the palm of your hand, slide the disc in the direction opposite to the arrow on the disc. The main thing is that when changing a disc on a grinder, do not violate safety precautions and remove the disc with the angle grinder turned off.
If you’ve misplaced the blade-changing wrench, or if you purchased a used angle grinder without a wrench, refer instead to our article about how to remove an angle grinder blade without tools. The new angle grinder blade should match the size and speed of your angle grinder. Learning how to change the blade on your angle grinder is an important step in mastering this powerful and adaptable tool.
How to remove an angle grinder disc without the tool. How to remove an angle grinder disc the appropriate way. Now that I’ve shown you how to remove an angle grinder disc without the tool, I’m going to tell you how to do it with the appropriate tool.
how to change angle grinder blade Related Question:
What tool is used to remove angle grinder?
A pin wrench is the required tool that comes with an angle grinder and is used to remove a disc. This wrench resembles a pitchfork and has two knobs on the end that you insert into the drive bolt to loosen the nut holes that attach to the disc.
When should I replace my angle grinder disc?
Always replace a cutting disc if it shows any signs of damage. This includes, but is not limited to visible cracks and chips or any signs of bending or twists to the wheel. Cut off wheels should be replaced when they hit their expiration date. This can be found imprinted on the metal center of the disc.
What is the thread on an angle grinder?
“The “standard” spindle (sometimes called the “arbor”) thread these days on a angle grinder in the US is 5/8-11 (5/8″ diameter and 11 threads per inch).
Can you use a diamond blade on an angle grinder?
Diamond blades have very high resistance and cause less heat during usage. The diamond blade can absorb more heat than other blades and is perfect to use with an angle grinder.
Can you use a saw blade on an angle grinder?
Angle grinders or disc grinders are a handheld power tool for grinding (abrasive cutting) and polishing stone, metal, and concrete. Although manufacturers warn against attaching a circular saw blade to an angle grinder for cutting wood (Fig.
How long do grinding discs last?
1 – Cutting and Grinding Discs Have Expiry Dates. This date is generally printed on the centre ring and is at a maximum three years from the manufacture of the disc. On smaller discs which lack a ring, this date may be printed on the label or even the disc itself.
Is it OK to use a cut-off wheel as a grinder wheel?
Usages. You can use cut-off discs for cutting metal bars, metal tubes and small pieces of metal sheets and plates. You can also cut out welds with them. For shortening the length of various bolts, it is also a good idea to use an angle grinder and a cut-off wheel.
When should you throw away a cutting wheel?
If you do not know, a good “rule of thumb” is to discard the wheel when you are 1” away from the recess. Portable cup wheels must be discarded when the machine’s guard prevents proper grinding. In this case a proper guard will determine discard size by preventing additional grinding on the wheel’s rim.
