Typically, an angle grinder is mainly used for metal, while circular saws are used for wood. Use the angle grinder for cutting through metal when it is necessary and save your circular saw for your wood projects as they come up. Deciding between using an angle grinder and a circular saw might seem like a tough decision when you don’t know what they are used for.
The debate between circular saw vs angle grinder is one that I’ve seen highlighted on many websites in recent years. Smaller Size – While comparable handheld circular saws aren’t huge, an angle grinder is usually more compact. Most of the time, a good angle grinder is much smaller than a circular saw and has its cutting and grinding apparatus at the end of the machine.
An angle grinder is a hand-held power tool used for cutting. Many different types of cutting wheel can be mounted on an angle grinder but they’re all essentially grinding wheels. Our vertical bandsaw is used more for cutting shapes than cutting to length.
An angle grinder is not a cutting tool in the same sense as a circular saw. A dangerous use of the angle grinder is to remove the grinding wheel and replace it with a circular saw blade. As can seen in the image above, the angle grinder has been converted into a defective circular saw.
circular saw vs angle grinder Related Question:
Can I use a circular saw as an angle grinder?
Angle grinders or disc grinders are a handheld power tool for grinding (abrasive cutting) and polishing stone, metal, and concrete. Although manufacturers warn against attaching a circular saw blade to an angle grinder for cutting wood (Fig.
What is the difference between a circular saw and an angle grinder?
On a circular saw, the blade is perpendicular to the motor. On an angle grinder, the blade is parallel to the motor so that it is used sideways for grinding and sanding. This makes a big difference in what you can do with each tool and makes the look of the tool unique as well.
Can I use an angle grinder to cut wood?
An angle grinder is a power tool that can be used for different projects. You can cut metal, aluminium, concrete, bricks, pavers, wood, and other dense materials; you can sand and polish different surfaces to sharpen tools and grind materials.
Can a circular saw cut angles?
All circular saws can be adjusted to make angled bevel cuts up to at least 45 degrees. However, when the base plate is tilted all the way over, the lower blade guard has a tendency to catch on the edge of the board.
Can I use a jigsaw instead of a circular saw?
Although a jigsaw can be used for most of the tasks that a circular saw can perform, including straight cuts and cuts on a tilt, the jigsaw uses that really take advantage of the tool’s qualities are jobs such as kitchen fitting and joinery, with their frequent need for complex cuts.
Can I cut pavers with angle grinder?
Tips for Cutting Pavers All standard cutting methods work for straight cuts, but for curved cuts, use a circular saw or angle grinder. Score the curved cut along the top of the paver first, cutting about 1/8 inch deep.
What is a grinder saw used for?
An angle grinder is a handheld power tool that can be used for a variety of metal fabrication jobs that include cutting, grinding, deburring, finishing and polishing. The most common types of angle grinder tools are powered by electricity; either corded or battery powered.
Can you cut marble with an angle grinder?
Cutting marble is a delicate process that requires precision cuts to achieve a professional result. Patience and the proper blade are crucial to avoid damaging the marble, which could be expensive to replace. A grinder is an ideal power tool to cut marble when outfitted with a diamond-cutting blade.
What can’t an angle grinder cut?
The inspiration behind this creation is the natural defense mechanisms used by shells, grapefruit skins, and fish scales that makes them resistant from the attacks of various sea creatures. The material, named Proteus, cannot be cut using either angle grinders, drills, or high-pressure water jets.
Can I use bigger disc on angle grinder?
Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.
Can a cut off saw be used for wood?
A cut off saw is a simple, yet powerful cutting tool used widely in metal cutting. The term cut off saw refers to two distinct classes of a power tool. First, the miter saw which is typically used in woodworking. The second is abrasive saw which is used to cut hard materials such as metals or ceramic.
Can you make a 45 degree cut with a circular saw?
Making 45-degree cuts with a circular saw might seem like an intimidating process, but with a little bit of preparation and practice, anyone can do this. There are two possible 45-degree angle cuts with a circular saw, a bevel cut, and a miter cut.
Can you use a circular saw as a miter saw?
You can make crisp, accurate bevel or miter cuts with a circular saw but it’s tricky. The blade guard can stick, making it tough to get started. And because the blade is angled, it’s more difficult to follow a line accurately without twisting the saw and possibly binding the blade.
Can you use a circular saw to cut baseboards?
You can also cut baseboard molding with a circular saw, but the vertical type of cut needed for baseboard requires that you tilt the base of the circular saw to 45-degrees.
Which saw should I buy first?
A jigsaw is great for cutting curves and shapes, and it can also be used with a guide to make straight cuts, which is why this is the first power saw you should own. Unless you plan to rip long sheets of plywood, a jigsaw is preferable over a circular saw.
