With the grinder unplugged, turn the grinder upside down so that you are looking at the grinding wheel and the locking apparatus. Since the grinding wheel rotates toward you, the right-side wheel nut is threaded as you’d typically expect and unscrews by turning the nut toward the front of the grinder. Cutting wood with an angle grinder carries the risk of injury to the tool operator.
how to change makita angle grinder blade Related Question:
Which way do you loosen a Makita angle grinder?
Place the lock not wrench onto the lock nut holding the disc in place. Turn the lock nut wrench counter-clockwise to loosen the lock nut.
When should I replace my grinder disc?
Always replace a cutting disc if it shows any signs of damage. This includes, but is not limited to visible cracks and chips or any signs of bending or twists to the wheel. Cut off wheels should be replaced when they hit their expiration date. This can be found imprinted on the metal center of the disc.
How do you loosen a metal grinder?
Do not crush it if you put the grinder head in a vise. You can use a rubber or plastic mallet to tap on the retaining ring. If it still won’t budge, get a torch and heat the retaining ring to expand, then tap sharply, but not too hard, with a light hammer.
What is the thread on an angle grinder?
“The “standard” spindle (sometimes called the “arbor”) thread these days on a angle grinder in the US is 5/8-11 (5/8″ diameter and 11 threads per inch).
Can you use a diamond blade on an angle grinder?
Diamond blades have very high resistance and cause less heat during usage. The diamond blade can absorb more heat than other blades and is perfect to use with an angle grinder.
Can you use a cut off wheel on an angle grinder?
Usages. You can use cut-off discs for cutting metal bars, metal tubes and small pieces of metal sheets and plates. You can also cut out welds with them. For shortening the length of various bolts, it is also a good idea to use an angle grinder and a cut-off wheel.
What tools use to remove the angle grinder disc?
A pin wrench is the required tool that comes with an angle grinder and is used to remove a disc. This wrench resembles a pitchfork and has two knobs on the end that you insert into the drive bolt to loosen the nut holes that attach to the disc.
