You can slide the switch to the “ON” position to turn on the grinder, and it will keep running until you slide the switch to the “OFF” position. I won’t advise you which angle grinder switch style, paddle vs slide switch, to choose or avoid as each one has its PROs and CONs. The choice between two switch styles – angle grinder paddle vs slide switch – depends on your job requirements and your job site’s policies.
Paddle switches are usually on 4,4.5, 5 inch grinders. The newer Milwaukee 4.5 has safety paddle switch and works great, stays on with little pressure and cannot be turned without depressing the safety. I notice some catalogs listing cutter disks for small grinders that say not Makita because of the locking on switch.
Safety personnel are advocating the use of these grinders and are now influencing what tool professionals use and distributors have in stock. “Some plants won’t even allow those types of grinders in their plant at all. They want it to have a safety shutoff; if the hand comes off, the grinder cuts off.” Grinder operators are benefiting from the improved safety and performance of nonlocking paddle switch grinders, which will continue to fuel the growth of these powerful and versatile tools.
Oh, BTW….MANY grinders with paddle switches now come with lock on buttons, so it ain’t like you have to keep the paddle squeezed full time. Sometimes you have to hold the grinder in odd positions and the paddle switch is not in the right place. My go-to grinder is my makita 5″ rattail, after that I have a couple of makita and bosch 4-1/2 inch barrel grip grinders with the thumb slide switch as well as two milwaukee 7″ grinders for heavy grinding.
angle grinder paddle vs switch Related Question:
What does a paddle switch do on an angle grinder?
Instead of a lock-on switch, these grinders feature a paddle alongside the grip. When you grip the handle, you also hold down the switch that turns the grinder on. If you lose control of the tool, you no longer will be holding down the paddle switch, and the grinder will turn itself off.
What is a switch paddle?
A modern twist on classic up-and-down switch control, the Paddle Switch lets you turn lights on and off with ease. Use this device on its own to control a light or fixture from a single location, or pair with a second switch or dimmer to control a single light source from two locations.
What is the difference between angle grinders?
In a nutshell, a die grinder is typically smaller and has several different attachments that can help you cut, sand, polish, and various other things. The angle grinder is a larger and often heavier tool that uses a rotating wheel to grind, sand, or cut larger materials.
What is a no lock on paddle switch?
The paddle switch provides additional operator control, while the no-lock-on feature shuts the motor off after the switch is released.
Are rocker switches better?
Style. Rocker switched are usually used in higher-end new construction while traditional switches are generally used in less expensive new homes. Rocker switches are generally considered to be more desirable for new homes and modern renovations.
What are the flat light switches called?
What Is a Rocker-Style Switch? A rocker-style switch is significantly wider and flatter than a traditional toggle switch. It functions in the same way to turn power on and off, but it requires less hand pressure to operate.
What is a 3 way paddle switch?
A 3-way switch is larger than a single pole switch and has three screw terminals for wiring connections, plus a ground. Two of these take traveler wires that go from one switch to the other. For the third terminal, one switch is connected to the hot supply wire while the other switch is joined to the light.
What are Decora switches?
Decora Devices – The Decora switch is the newer type of light switch shaped in a large rectangle that is roughly 1.25″ wide by 2.5″ tall. These have many alternate names including decorator, designer, rocker, paddle, block, flat or wide switches although it is most commonly referred to as a Decora switch.
Can I sand with an angle grinder?
An angle grinder can be used as a sander if the disc on the grinder is made specifically for sanding. With the high velocity of speed that comes with using an angle grinder, a sanding disc can do twice the sanding capabilities in a shorter amount of time than a traditional sander.
What is Milwaukee No lock?
Our M18 FUEL™ 4-1/2” – 6” Braking Grinder, Paddle Switch, No-Lock is our highest performing small angle grinder. It generates the power of a 13A corded grinder, brakes all accessories under 3 seconds, and has 6” grinding capacity.
What is lock on switch?
One use for a switch lock is on a simple on/off switch. The lock can be used to keep the switch in an on or off position to prevent accidental activation of the switch. This can be useful when a switch controls something critical and people want to prevent an accident.
Are toggle switches better?
Functionality All in all, rockers and toggles do the same job: turn power on and off. The biggest difference in terms of functionality is that toggles have a bit more “snap” and rockers seem to require a little more force to switch.
Do I need an electrician to change a light switch?
Do I need an electrician to replace a light switch? No. If you’re replacing a broken light switch or a like-for-like one, it’s a simple task that only requires you to know how to safely isolate the circuit and some basic tools.
Is there a quiet light switch?
Leviton Decora 15 Amp Single Pole Rocker AC Quiet Light Switch, White (10-Pack) M32-05601-2WM.
Which type of light switch is best?
If you want to install lighting in a new room, then using a toggle light switch is probably going to be your preferred option. There are some other switches that will offer better features than a standard toggle switch, but this will work nicely for any general lighting purposes.
