This is a reality check post, so feel free to be blunt…. “I’m leaning heavily toward purchasing a new Craftsman bandsaw which will be used mostly for curve cutting and similar general purpose cuts. I’m almost”jigged-up” to the point where I could resaw 6″ wide boards on my 10″ contractor’s saw, but haven’t tried it. “10” Bandsaw $130, 1/3 HP, 4 5/8″ resaw, 1/2″ max blade, 1 speed, no stand, fence. I like the Craftsman 14″ over the Grizzly 14″ because it has decent resaw height without adding a riser block.
To make your band saw shopping experience a bit easier I found the top three recommended band saws by the most common sizes: Benchtop, 14 inch, 17 inch and 18 inch band saws. >> Best 14 Inch Band Saws14 Inch Band Saws are the band saw size of choice for most serious hobbyists woodworkers. >> The Best 17 Inch Band SawsYou could be just as hampered by a 14″ band saw as by a bench top if your projects call for higher capacity.
A saw made for tall resawing as well as general cutting needs to satisfy three main criteria for me: the blade guides should be easy to adjust; the rip fence and features should aid in resawing; and the motor must be gutsy enough to keep the blade spinning through wide stock. Blades load through a side slit on the table, then must be turned 90° in a small throatplate opening, while threading it in through a slit in the saw’s yellow upper blade guard and between the guide bearings. Once a blade is threaded, the saw has a three-position quick-release lever in back for tensioning.
bandsaw 10 vs 14 Related Question:
Do I need a 14 inch bandsaw?
For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
Is a 14 bandsaw big enough?
Re: Bandsaws: 14″, or is bigger better? If you are not going to do any resawing, then a 14″ will do just fine. If you may be cutting out bowl blanks for a lathe, then you should consider a riser to get more vertical clearance.
What does 14 mean on a bandsaw?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
What size bandsaw is best?
For a hobbyist, a 12″-14″ bandsaw is the ideal size. This size saw will provide plenty of power and a good deal of resawing capability. A professional will be better served with an 18″ bandsaw for a larger resawing capability. Choosing a 14″ band saw would provide plenty of power in a smaller footprint.
Is 1 hp enough for a bandsaw?
1 Horespower is a lot of power, it is aproximately 50% more work than a horse can do on a long term basis, and aproximately 6 times what a person can do. A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
What power bandsaw do I need?
Most home-level models incorporate a 3/4 to 1 horsepower motor, whereas professional models will have larger motors with variable speeds. For woodworkers, the variable speed won’t really matter, as slower than max speeds should be incorporated when cutting metals and some hard plastics.
What is the throat on a bandsaw?
The throat is the distance from the blade to the vertical frame section of the body of the saw. This distance determines the width of cut that can be completed on the band saw. The throat on a free-standing cabinet band saw typically exceeds the 12 to 14-inch throat of smaller, bench-top models.
What is the size of a band saw?
The size of a band saw is given in inches, with 14-inch being the most common. The size refers to the distance between the blade and the saw’s throat, or the column that supports the upper wheel. Band saws range in size (and price) from 10-inch benchtop machines to 24-inch freestanding ones for professional shops.
What is the smallest band saw?
The Proxxon Micro Saw is by far the smallest, lightest, most easily portable and stowable saw in this bunch. It has only 5-7⁄8″ of throat depth and about 3-3⁄8″ of cutting depth.
How thick of wood can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
Does bandsaw blade thickness matter?
Bandsaw Blade Thickness The thickness of the blade depends on the diameter of the wheels, and the work to be done. Thick blades withstand more cutting strain from straight cuts but can break more easily from the bending and twisting action. Thinner blades perform well for lighter work.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.