04-28-2012, 12:03 PM #1 I have a 14″ Jet band saw with riser and am looking for recommendations on 1/4″ blades. 04-28-2012, 2:52 PM #3 After a couple of years with a Rockwell 14″ saw doing hobby work, I homed in on a 1/4″ x 6tpi bimetal blade as the go-to blade for about 90% of the work I do with both thin and thick stock. 04-28-2012, 10:24 PM #6 The Lenix Diemaster is my go to bi-metal blade and about the best 1/4″ bands you can buy.
Select Product Options Here Length: Select Length 69-1/2 inch 70-1/2 inch 72 inch 73 inch 80-1/2 inch 82 inch 89-1/2 inch 93-1/2 inch 95 inch 98 inch 99-3/4 inch 105 inch 106 inch 111 inch 112 inch 113 inch 115 inch 116 inch 120 inch 123 inch 124 inch 125 inch 130 inch 131-1/2 inch 132 inch 133 inch 137 inch 142 inch 143 inch 145 inch 149 inch 150 inch 153 inch 154 inch 155 inch 156-1/2 inch 158 inch 160 inch 162 inch. We’ve sold these bandsaw blades for many years. They leave a smoother kerf than other bandsaw blades we’ve tested, and their welds are the best we’ve seen in general-purpose blades.
A bandsaw will make many cuts with precision and speed-when equipped with the right blade for the application. Bandsaw blades differ in thickness, width, length, and tooth configuration. Every time you change from one bandsaw blade width to another, you have to reset the saw’s tracking, tension, and blade guides.
Multi-use blades are a popular alternative when you need a blade that can do it all, but they are not necessarily the best bandsaw blade. Some of the best bandsaw blades don’t have an exotic moniker at all, and we simply refer to them as regular or standard blades. Bandsaw blade buying guide Top choice: Timber Wolf Bandsaw Blade 1/2″ x 93-1/2″. Timber Wolf’s Bandsaw Blades are a popular choice whether you need to make a quick rip or cut contours with precision.
best 1/4 bandsaw blade Related Question:
What radius can a 1/4 bandsaw blade cut?
This is strong enough to cut thick wood, but can still cut some of the wider radius curves down to approximately 4 inches. Install a 1/4-inch blade on the saw to cut radius curves smaller than 4 inches. But be aware that blades this small break easily when hardwoods thicker than 1/2 inch are introduced.
What is the best TPI for cutting wood?
If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.
How long should a metal bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
Does bandsaw blade thickness matter?
Bandsaw Blade Thickness The thickness of the blade depends on the diameter of the wheels, and the work to be done. Thick blades withstand more cutting strain from straight cuts but can break more easily from the bending and twisting action. Thinner blades perform well for lighter work.
How much tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
What width bandsaw blade is best for Resawing?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
Why is my bandsaw burning the wood?
A majority of issues with wood burning is because of a dull saw blade. These blades may not be sharp enough to efficiently cut the wood, and thus create enough friction to heat and burn the wood. What is this? Dull blades make it more challenging to cut, which causes friction as you pass the wood through.
What is TPI on bandsaw?
The number of TPI defines the pitch of the blade and can vary from 1 to 32 TPI. On some bandsaw blades there are different pitches on the same blade referred to as Vari-Pitch. TPI is measured from gullet to gullet, not tooth tip to tooth tip – this is known as pitch.
What is the best TPI for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
What does 32 TPI mean?
Blades are also described by the number of teeth per inch (TPI). Blades have 14, 18, 24, 32 teeth per 25mm (inch). A blade with 14 TPI is coarse whilst a blade with 32 TPI is very fine.
Is it worth it to sharpen bandsaw blades?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.
How many times can a bandsaw blade be sharpened?
It often makes sense to replace a dull blade with a new one, but you can sometimes get the best value out of merely sharpening an old blade instead of replacing it altogether. You should typically be able to get two to three sharpenings before you need to change your blade completely.
Why do bandsaw blades break?
Even the best blades can fail if there is something else wrong with your bandsaw, and even a small misalignment of bearings or guides can put a twist in the blade as it goes around. Resulting in tension being applied in all the wrong ways which will lead to early breakage.