“I recently purchased a General Band Saw, Model 490-1 other wise called a 15”. The base model came with factory guides and a hp motor. “The upper frame is a massive box type one piece of cast steel, it is well ribbed and weighs a ton. I need to get help to lift it on to the base during assembly. It has two stamped hinged doors with a 2” dust port located below the front door.
BandsawsTotal:232by General International:21On HingmyOwned by:NoneIn List:NoneManufacturer DescriptionQuick, easy, upper and lower wheel parallel alignment using a block and groove mechanism adjusted by a handle at the back of the machine. Powerful North American designed, totally enclosed, fan cooled motor with a dynamically balanced cast-iron pulley. One-piece, high quality, welded steel cabinet for maximum strength and stability.
The exciting news is, an old General 490 fell into my truck recently, in exchange for helping a friend with a job this summer. I think it’s the General 4990 enclosed stand I’d be looking for. I have a quote of $440 + tax for a new stand from General.
general 490 bandsaw specs Related Question:
What does 14 mean on a bandsaw?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
How much HP does a bandsaw need?
A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
What is band saw throat depth?
The throat is the distance from the blade to the vertical frame section of the body of the saw. This distance determines the width of cut that can be completed on the band saw. The throat on a free-standing cabinet band saw typically exceeds the 12 to 14-inch throat of smaller, bench-top models.
What size bandsaw is best?
For a hobbyist, a 12″-14″ bandsaw is the ideal size. This size saw will provide plenty of power and a good deal of resawing capability. A professional will be better served with an 18″ bandsaw for a larger resawing capability. Choosing a 14″ band saw would provide plenty of power in a smaller footprint.
What determines the size of a bandsaw?
The Specs. A bandsaw is nominally sized by the diameter of its wheels. The throat width is then immediately recognizable as about 1″ less — that defines the widest board that can be passed between the blade and the column. The resaw capacity is the maximum height (thickness) that can be cut.
What size blade does a 12 inch bandsaw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations.
How do you measure the depth of a bandsaw blade?
Also known as the thickness, the depth of your band saw’s blade is easy to measure with a tape measure. Place the tape measure on one edge of your band saw then slowly pull it until you reach the other end.
What does resaw mean on a bandsaw?
A resaw is a large band saw optimized for cutting timber along the grain to reduce larger sections into smaller sections or veneers. Resawing veneers requires a wide blade – commonly 2 to 3 inches (52–78 mm) – with a small kerf to minimize waste.
How much power does a bandsaw use?
For ordinary work, cutting through no more than 1.5″ (4 cm) of wood, at speeds below 2000 fpm, 1/3 HP is adequate. If you want to do a lot of resawing, and run the saw at high speeds, you may want up to 1.5 hp. A sharp blade will use less than half the power of a dull blade.
What is the difference between a band saw and a scroll saw?
Now, one of the really big differences is that the scroll saw’s blade moves up and down, whereas the band saw’s blade moves in a continuous downward motion. Band saws also differ in the thickness and size of materials which they can handle.
How thick of wood can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
Does bandsaw blade thickness matter?
Bandsaw Blade Thickness The thickness of the blade depends on the diameter of the wheels, and the work to be done. Thick blades withstand more cutting strain from straight cuts but can break more easily from the bending and twisting action. Thinner blades perform well for lighter work.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
What is the smallest band saw?
The Proxxon Micro Saw is by far the smallest, lightest, most easily portable and stowable saw in this bunch. It has only 5-7⁄8″ of throat depth and about 3-3⁄8″ of cutting depth.