Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods, plastics, and non-ferrous metals. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use. 20 – 24 variable to cut 1/16″ to 1/4″ thick material, * 14 – 18 variable to cut 1/8″ to 3/8″ thick material, * 10 – 14 variable to cut 3/16″ to 7/16″ thick material, * 8 – 12 variable to cut 1/4″ to 1/2″ thick material, * 6 – 10 variable or 6 Hook to cut 5/16″ to 5/8″ thick material, * 5 – 8 variable or 6 Hook to cut 3/8″ to 1″ thick material, * 4 – 6 variable or 6 Hook to cut 1/2″ to 2″ thick material, * 3 – 4 variable or 4 Hook to cut 3/4″ to 4-1/2″ thick material, * 3 Hook to cut 1″ to 6″ thick material, * 2 Hook to cut 2″ to 12″ thick material.
High speed steel tooth tips combined with flexible alloy steel backing material results in band saw blades that are the most cost effective choice for most metal sawing applications. These band saws will cut faster and last longer than any other band saw blade in a wide variety of sawing applications. BAND SPEEDThe rate at which the band saw blade moves across the work to be cut.
62 bandsaw blade for metal Related Question:
What TPI is best for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
What is the best blade for cutting metal?
We recommend using a diamond blade that’s labeled as a ferrous-metal-cutting blade, but many tradespeople use a regular masonry diamond blade with good results.
Can I cut metal on my bandsaw?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
Can you put a metal blade on any bandsaw?
Wood bandsaws run at too high a speed. Even just changing to a metal cutting blades will eat blades up fast if your cutting anything thicker than 20 ga. aluminum.
How many TPI does a bandsaw blade need?
For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
Can I put a metal cutting blade on my miter saw?
Although mitre saws were traditionally used for cutting wood, with the correct blade they can make light work of cutting through steel and aluminium profiles at an angle.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
Can carbide blade cut metal?
Carbide metal cutting blades offer a full range of sizes and profiles for cutting both ferrous and non-ferrous metal. Ferrous metal blades can be used for cutting all types of metal construction products including steel siding, roofing, steel studs, and other construction steel.
Can a bandsaw cut hardened steel?
Carbide band saw blades provide high wear resistance and toughness when cutting a variety of applications such as: case hardened steels, spring steels, high speed steels, nickel based alloys, case hardened steels, composite graphite, high nickel alloys, titanium, inconnel, and other exotic metals.
How long should a metal bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
Can I cut aluminum with a bandsaw?
Band saws were never really considered to be a wise choice for aluminum cutting, but that has changed recently. With the advancements in band saw technology, large aluminum billet now can be cut almost as quickly as with large circular saws.
What speed should you cut metal with on a bandsaw?
To cut steel, you’ll need to run the machine at a much slower speed — about a hundred feet per minute. A machine running at this speed might look like it’s running too slowly, but running it any faster almost guarantees that you’ll damage the blade.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.