“High quality, precision-machined, one-piece cast-iron frame.16 gauge stamped steel doors.Heavily-ribbed, high quality, solid cast-iron table polished to perfection with a 3/8″ x 3/4” miter gauge T-slot. Hardened steel upper blade guide, mounted on a steel arm with sealed ball-bearings for extra support. One-piece, high quality, welded steel cabinet for maximum strength and stability.
05-16-2006, 9:34 PM #5 A Candian made General 15 inch band saw is money well spent. I’m a little concerned about some of the after sale service stories I’ve read, and the General dealer is right here in town…. 05-17-2006, 2:09 PM #9. You’re right Glen, the MM16 is a better saw. I’m a little concerned about some of the after sale service stories I’ve read, and the General dealer is right here in town…. robert, if you`re serious about a mm saw call `em up and ask point blank about whatever issues concern you.
The Jet gets great reviews – it’s been out for a while, and typically gets the best-bang prize in published reviews. For a lot less that the $400 the smaller genertal would cost you, you can get the Jet. The General is somewhat stouter of construction.
BandsawsTotal:232by General International:21On HingmyOwned by:NoneIn List:NoneManufacturer DescriptionQuick, easy, upper and lower wheel parallel alignment using a block and groove mechanism adjusted by a handle at the back of the machine. Powerful North American designed, totally enclosed, fan cooled motor with a dynamically balanced cast-iron pulley.
687 mm bandsaw blade Related Question:
What is most common bandsaw blade size?
For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
How long is an 18 bandsaw blade?
133 inch Band saw Blades to fit 18 Jet Bandsaw, 18 Craftsman.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
How do I know what size bandsaw blade I need?
In inches, determine the radius of each wheel, by measuring from the center to the outside of the wheel. Apply the following formula: (R1 x 3.1416) + (R2 x 3.1416) + (2 x C) = Saw blade length. Put a strip of tape on the floor to mark a starting point.
How do I choose a resaw blade?
For resawing, use the widest 3-tpi skip- or variable-tooth blade your saw accepts. Typically, the wider the blade, the straighter it cuts. Cutting green (undried) wood requires the widest 2–3-tpi skip-tooth blade your saw accepts.
How thick of wood can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
How much tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
What is a 3h bandsaw blade?
Description. These are excellent-quality steel bandsaw blades that excel at ripping thick stock and resawing, and are also suitable for roughing blanks for carving or turning. The coarse 3 tpi hooked teeth power through hard woods and difficult grain, and have deep gullets for clearing sawdust.
What size blade do I need for a 14 inch bandsaw?
Product Description. 3/16″ Wide x 93-1/2″ Long, 10 TPI, Band Saw Blade, . 025″ Thick, Fits All 14″ Delta/Rockwell, 14″ Jet, Grizzly, 14″ Reliant, Enlon, Star, Bridgewood & Most Imported 14″ Band Saws, Mild Scroll Cutting In Wood.
What size blade does a 14 bandsaw take?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
How long is a 12 bandsaw blade?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt.
Can a band saw cut curves?
Whether it’s a tight curve or a closed opening, you can cut it on your band saw with a couple of easy tricks. Cutting on the band saw can be the same thing. The narrower the blade, the tighter the spots you can cut; in fact, some band saw blades rival a scroll saw for cutting tight curves.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
How do you measure the size of a bandsaw?
To determine the size of a band saw, measure the distance from the blade to the throat. That measurement is a little more than the largest piece of wood the band saw can handle. The band saw’s large circular blade is placed around the tool’s top and bottom wheels. Some band saws have built-in fences.
What size blade does a Milwaukee band saw?
Milwaukee Standard / Deep Cut Portable Band Saw Blades are designed to maximize performance of any portable band saw that takes a 44-7/8″ blade. They will deliver long tooth life and exceptional durability in metal-cutting applications, including strut, conduit, angle iron, copper tube, threaded rod, and pipe.