Package contents The package contains: 1 Partly assembled machine 1 Table 1 Rip fence 1 Box spanner 8 mm 1 Pack containing: 1 Table insert 2 Blade guide blocks 45° 2 Blade guide blocks 90° 3 Coach bolts M8 x 60 4 Hex nuts M8 8 Washers D8 2 Washers D6 1 Hex bolt M8 x 60 4 Hex bolts M8 x 20 2 Hex bolts M6 x 65 en – 2 2 Knobs 2 Fence clamp pieces 1 Allen key 2.5 mm 1 Allen key 6 mm 1 Instruction manual 1 Exploded drawing Check for damage to the tool, parts or accessories which may have occurred during transport. A 1 ON/OFF-switch 2 Safety key 3 Blade guard 4 Table insert 5 Hinged cover 6 Blade tension adjuster 7 Blade centring adjuster 8 Cover retention knobs 9 Table tilt locking lever 10 Fence 11 Blade guard height adjuster 12 Upper blade guard/guide assembly 13 Motor location bolt 14 Blade speed adjuster 15 Table 16 Mounting holes Fig. Adjust the blade tension using the blade tension adjuster until the scale indicates the tension corresponding to the blade width.
Carbon blades are ideal for wood production cutting and short production / maintenance / general purpose applications using low alloy steel and non-ferrous metals. Manufactured from a single piece of high carbon steel with individually hardened tooth tips.
dewalt 738 bandsaw blades Related Question:
What size blade goes on a Dewalt bandsaw?
14/18 tpi blade.
How do I know what size bandsaw blade I need?
In inches, determine the radius of each wheel, by measuring from the center to the outside of the wheel. Apply the following formula: (R1 x 3.1416) + (R2 x 3.1416) + (2 x C) = Saw blade length. Put a strip of tape on the floor to mark a starting point.
What size blade does a Dewalt DCS371 bandsaw take?
DEWALT Cordless, Portable Band Saw, 20V DC, 32 7/8 in Blade Length – 25DU76|DCS371P1 – Grainger.
Are Dewalt and Milwaukee bandsaw blades interchangeable?
Blade. If you’ve used any type of power tool, you’ll be well aware of the importance of the blade, and keeping it maintained properly. The Milwaukee 2429-21 XC compact bandsaw allows for blades up to 32” to be used, and the DeWalt DCS317B can take a blade with the sizing of 27 ½”.
What size blade does a 12 inch bandsaw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations.
How do you measure the size of a bandsaw?
To determine the size of a band saw, measure the distance from the blade to the throat. That measurement is a little more than the largest piece of wood the band saw can handle. The band saw’s large circular blade is placed around the tool’s top and bottom wheels. Some band saws have built-in fences.
How do you measure the depth of a bandsaw blade?
Also known as the thickness, the depth of your band saw’s blade is easy to measure with a tape measure. Place the tape measure on one edge of your band saw then slowly pull it until you reach the other end.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
What’s the difference between bandsaw blades?
Bandsaw blades differ in thickness, width, length, and tooth configuration. Length varies by machine, but the size of your saw’s wheels typically determines thickness and width: Smaller machines (9–12″ wheels) need thinner blades to prevent breaking the welds. They also accept only narrow blades, often 1⁄ 2 ” or less.
How long should a metal bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
What does TPI mean on a bandsaw blade?
You must select the correct Teeth Per Inch (TPI) for the thickness of material you are cutting.
How many teeth per inch should a bandsaw blade have?
The number of teeth per inch (TPI) is important in obtaining the finish desired and the proper feed rate. A coarse tooth blade (2, 3 TPI) should be used for resawing wood and cutting thicker stock up to 8″. A fine toothed blade (18 to 32 TPI) should be used for thinner metals and plastics under 1/4″.
What size blade does a Dewalt DCS374 take?
What blade will fit a DCS374? Answer: The DCS374 portable band saw is designed to use . 020″ (0.5 mm) thick, 1/2″ (12.5 mm) wide and 44-7/8″ (1140 mm) long blades.
Are band saw blades interchangeable?
For cutoff work, band saw blades should be as thick as the saw and material will allow. TPI stands for “teeth per inch” when talking about band saw blades. “Pitch” is interchangeable with TPI when talking about band saw blades.
What size blade do I need for a 14 inch bandsaw?
Product Description. 3/16″ Wide x 93-1/2″ Long, 10 TPI, Band Saw Blade, . 025″ Thick, Fits All 14″ Delta/Rockwell, 14″ Jet, Grizzly, 14″ Reliant, Enlon, Star, Bridgewood & Most Imported 14″ Band Saws, Mild Scroll Cutting In Wood.