The circular saw is a lightweight and powerful machine that has a great power-to-weight ratio and low vibrations. This means less strain and more work done.
The double protection switch makes sure the machine doesn’t open by itself, which means a better cutting job. The water line sends water to the blade, which reduces dust and makes the blade work better and last longer.
It has a powerful 3200W motor that has enough power to cut through granite, porcelain, concrete, and other stones with ease.
To get rid of cutting debris, you need an extraction port. This port can help you clear the cutting surface quickly, keep the cutting line free of dust all the time, and give you a clear view of the cutting line. With the metal guard, you won’t get hurt when you’re working.
Whether you’re cutting wet or dry, the dual integrated dust management system takes the dust out of the job. For wet cuts, add a water feed attachment and control the flow with a simple valve. Water feeds water to the blade, reducing dust and increasing blade life. If you buy the tool now, it also comes with a GFCI built into the cord.
The circular saw is a lightweight and powerful machine that has a great power-to-weight ratio and low vibrations. This means less strain and more work done. The double protection switch makes sure the machine doesn’t open by itself, which means a better cutting job. The water line sends water to the blade, which reduces dust and makes the blade work better and last longer. It has a powerful 3200W motor that has enough power to cut through granite, porcelain, concrete, and other stones with ease. To get rid of cutting debris, you need an extraction port. This port can help you clear the cutting surface quickly, keep the cutting line free of dust all the time, and give you a clear view of the cutting line. With the metal guard, you won’t get hurt when you’re working. There are two ways to use the dust management system: either wet or dry. It removes any dust from the job. In order to make wet cuts, attach a water feed attachment and use the valve to control the flow. The water line feeds water to the blade, cutting down on dust and making the blade last longer. If you buy the tool now, it also comes with a GFCI built into the cord.
I bought this saw because I was going to be putting up a long retaining wall that was going to take me a lot of time to finish, and renting a saw for that long would have cost more than buying this saw and a blade (It does not come with one). I was afraid, though, that even though it was cheap, it might not be strong enough or durable enough to last. Soon after, the wall is done. It looks like the saw did a good job. It’s a big saw with a 16-inch blade “The blade looks a little scary at first. As for the water line, you can just cut it in half:. It easily cuts through the block at a couple of inches per pass, so it doesn’t take long to do it. If you eat too much, it will use all 20 amps and more. With a long extension cord, it would be easy to trip the breaker with one. I used my portable generator so I could get rid of the extension cord that solved the problem. Worth every penny. Check out the 16th “It costs a lot to buy blades. If you want a blade that you can make yourself, expect to pay $150 for it. Three times as much as the saw! A good blade will cost three times as much.
