This butcher band saw blade is made from a high quality, stain resistant steel with easy-cleaning polished sides. It features precision ground, heat-treated teeth that are razor sharp and have a tooth profile designed for cutting meat and bone, i.e. Bone-in beef, pork, lamb; fish cutting.
Disclaimer: The above described parts are supplied by National Band Saw Company as replacement parts for equipment. WARNING: This product can expose you to chemicals including Formaldehyde CAS #50-00-0 Trace Level Contaminant, or other Prop 65 listed chemicals, which is known to the State of California to cause cancer.
66 inch band saw blades Related Question:
What is the largest size blade that can be used on the 14 band saw?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
What is the biggest band saw?
With an unprecedented capacity of 31.25″ x 37.5″ the new Marvel Series 800 is the Largest Vertical Tilt-Frame Band Saw in the World.
Can I use a longer bandsaw blade?
Try a blade of 114” or 115” length; it’s more than likely that either one will work just fine. Most bandsaws will accept a range of blade lengths, sometimes with as much as 2” difference between the shortest and longest blades that the saw can use.
What size blade does a 18 inch bandsaw take?
133 inch Band saw Blades to fit 18 Jet Bandsaw, 18 Craftsman.
What size blade do I need for a 14 inch bandsaw?
Product Description. 3/16″ Wide x 93-1/2″ Long, 10 TPI, Band Saw Blade, . 025″ Thick, Fits All 14″ Delta/Rockwell, 14″ Jet, Grizzly, 14″ Reliant, Enlon, Star, Bridgewood & Most Imported 14″ Band Saws, Mild Scroll Cutting In Wood.
What size blade does a 14 inch jet bandsaw take?
To get you started your JET band saw comes with a 3/8”, 6TPI woodworking blade. Features: A 15″ x 15″ offset cast iron table that gives you more work area in front of the blades.
What blades do bandsaws have?
There are three basic tooth styles in bandsaw blades: regular, skip and hook. Regular tooth blades have proportionally spaced teeth and are ideally suited for general-purpose cutting and contour sawing. Regular blades are ideal for cutting thin materials with a fine finish.
What type of bandsaw blade is best for Resawing?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
What size blade does a 12 inch band saw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt.