Shipping & Returns Learn more about policies and international shipping. Learn More Customer Care Talk to a friendly customer care representative to help with your purchase. 1-800-225-1153 Talk to an Expert Get advice on the latest products and help with your projects.
1/8-inch blade width provides users a minimum cutting radius of 3/16 of an inch. This American-made blade measures in at 72 inches long for compatibility with the WEN 3962 10-Inch Two-Speed Band Saw. This bandsaw blade features a 0.125-inch width, a.025-inch thickness, and 14 teeth per inch.
72 x 1/8 bandsaw blade Related Question:
What sizes do bandsaw blades come in?
Use coarse tooth blades (2 or 3 TPI) for re-sawing and cutting thicker materials. For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
What radius can a 1/4 bandsaw blade cut?
This is strong enough to cut thick wood, but can still cut some of the wider radius curves down to approximately 4 inches. Install a 1/4-inch blade on the saw to cut radius curves smaller than 4 inches. But be aware that blades this small break easily when hardwoods thicker than 1/2 inch are introduced.
How do I know what size bandsaw blade I need?
In inches, determine the radius of each wheel, by measuring from the center to the outside of the wheel. Apply the following formula: (R1 x 3.1416) + (R2 x 3.1416) + (2 x C) = Saw blade length. Put a strip of tape on the floor to mark a starting point.
What is a 3h bandsaw blade?
Description. These are excellent-quality steel bandsaw blades that excel at ripping thick stock and resawing, and are also suitable for roughing blanks for carving or turning. The coarse 3 tpi hooked teeth power through hard woods and difficult grain, and have deep gullets for clearing sawdust.
Can I use a longer bandsaw blade?
Try a blade of 114” or 115” length; it’s more than likely that either one will work just fine. Most bandsaws will accept a range of blade lengths, sometimes with as much as 2” difference between the shortest and longest blades that the saw can use.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel. 0.50 (1/2 in.)
How long is a 14 inch bandsaw blade?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
How much tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
What bandsaw blade is best for resawing?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
Can a band saw cut curves?
Whether it’s a tight curve or a closed opening, you can cut it on your band saw with a couple of easy tricks. Cutting on the band saw can be the same thing. The narrower the blade, the tighter the spots you can cut; in fact, some band saw blades rival a scroll saw for cutting tight curves.
How thick can a band saw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
What size blade does a 12 inch bandsaw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations.
How do you measure a bandsaw on a wheel?
You can easily determine the size of your band saw wheel by measuring its diameter. Simply subtract 2 inches from this total, and you have determined the size of the band saw tire you need as a replacement.