Please enter a quantity of $qty dummy$ or less Please enter a quantity of 1 Purchases are limited to $qty dummy$ per buyer Please enter quantity of 1 or more Please enter a lower number Choose quantity that is less than $qty dummy1$ or equal to $qty dummy$ You can only choose quantity that is equal to $qty dummy$. The item you’ve selected was not added to your cart.
Olson All Pro Band Saw Blades are a Super Hard Edge, Tempered Back band saw blades, made from a unique steel formula containing pinpoint carbides, Molybdenum, chrome, and silicon. The combination of uniform tooth hardness coupled with ingredients specifically designed to improve longevity, durability and edge retention makes All*Pro bands of choice. Applications: For hard/soft woods Including: Exotic hardwoods, plastic, mild steel and non-ferrous metals Benefits: Longer lasting, more durable and controllable than any other carbon band saw blade, tough and shock resistant, for more difficult cutting operations.
This butcher band saw blade is made from a high quality, stain resistant steel with easy-cleaning polished sides. It features precision ground, heat-treated teeth that are razor sharp and have a tooth profile designed for cutting meat and bone, i.e. Bone-in beef, pork, lamb; fish cutting.
78 metal bandsaw blade Related Question:
Can you put a metal blade on any bandsaw?
Wood bandsaws run at too high a speed. Even just changing to a metal cutting blades will eat blades up fast if your cutting anything thicker than 20 ga. aluminum.
How thick of metal can a bandsaw cut?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
How do I choose a metal cutting bandsaw blade?
In general the following rule applies to choosing the speed of your bandsaw blade: The harder the material, the slower the speed; conversely, the softer the material, the faster the speed. The faster the speed, the finer the finish produced on the cut surface.
How tight should a metal bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in.
What speed should you cut metal with on a bandsaw?
To cut steel, you’ll need to run the machine at a much slower speed — about a hundred feet per minute. A machine running at this speed might look like it’s running too slowly, but running it any faster almost guarantees that you’ll damage the blade.
Can a bandsaw cut hardened steel?
Carbide band saw blades provide high wear resistance and toughness when cutting a variety of applications such as: case hardened steels, spring steels, high speed steels, nickel based alloys, case hardened steels, composite graphite, high nickel alloys, titanium, inconnel, and other exotic metals.
How long should a metal bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
What is the best TPI for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.
What causes bandsaw blade drift?
Drift is cause because the blade buckles under the load. You can see that by stretching a ribbon between 2 points and applying a pressure to one of the edges, it will turn sideway easily. A sharp blade and high blade speed will help a lot with that.
What RPM should a bandsaw run at?
Bandsaws always use 1725 rpm. The 3450 rpm are way too fast. From contributor R: Depending on the size of the wheels bandsaw blade speeds can vary between 2000 SFPM to over 4500 SFPM.
How high can a bandsaw cut?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
How do I increase the speed of my bandsaw?
Answer: Some models of bandsaws do provide the ability to alter the speed of the blade (usually expressed as FPM – feet per minute). The change of speed is usually accomplished by moving a drive belt to a secondary location on the pulley(s) of the drive pulley and motor pulley.
What’s the difference between bandsaw blades?
Bandsaw blades differ in thickness, width, length, and tooth configuration. Length varies by machine, but the size of your saw’s wheels typically determines thickness and width: Smaller machines (9–12″ wheels) need thinner blades to prevent breaking the welds. They also accept only narrow blades, often 1⁄ 2 ” or less.