All Magnate™ bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. 24 raker to cut 1/16″ to 1/4″ thick material, * 18 raker to cut 1/8″ to 3/8″ thick material,* 14 raker to cut 3/16″ to 7/16″ thick material,* 10 raker to cut 1/4″ to 5/8″ thick material,* 6 Hook to cut 3/8″ to 2″ thick material,* 4 Hook to cut 3/4″ to 4-1/2″ thick material,* 3 Hook to cut 1″ to 6″ thick material,* 2 Hook to cut 2″ to 12″ thick material.
Items in stock at our warehouse typically ship same day if the order is placed before 3pm Central Time. Availability on Items shipped directly from the factory is an estimate for that product based on averages from our experience. Items marked “Call for availability” have limited stock or unpredictable lead times and require a phone call to get a lead time estimate.
QUIKSILVER® Carbon Flexback Band Saw Blades are ideal for wood production cutting and short production/maintenance/general purpose applications using low alloy steel and non-ferrous metals. Manufactured from a single piece of high carbon steel with individually hardened tooth tips. Low cost-per-blade/higher cost-per-cut in tougher materials.
89 metal cutting bandsaw blades Related Question:
How do I choose a metal cutting bandsaw blade?
In general the following rule applies to choosing the speed of your bandsaw blade: The harder the material, the slower the speed; conversely, the softer the material, the faster the speed. The faster the speed, the finer the finish produced on the cut surface.
Can I put a metal cutting blade on my band saw?
Typically if you run a metal blade on a wood bandsaw the excessive speed (2000 sfpm+) of the wood saw will knock the teeth off of your metal cutting blade in a hurry. You could make it work, but you would have to slow the blade drive wheel way down. Think 250 sfpm to 80 sfpm.
How thick of metal can a bandsaw cut?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
How long should a metal cutting bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
What is the best TPI for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
Can you use a metal cutting bandsaw for wood?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
What speed should you cut metal with on a bandsaw?
To cut steel, you’ll need to run the machine at a much slower speed — about a hundred feet per minute. A machine running at this speed might look like it’s running too slowly, but running it any faster almost guarantees that you’ll damage the blade.
Can a bandsaw cut hardened steel?
Carbide band saw blades provide high wear resistance and toughness when cutting a variety of applications such as: case hardened steels, spring steels, high speed steels, nickel based alloys, case hardened steels, composite graphite, high nickel alloys, titanium, inconnel, and other exotic metals.
Can you cut metal with a wood blade?
While a metal-cutting saw has a collection bin to prevent metal chips from getting into the machine, a woodcutting saw isn’t designed this way. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque.
How many times can a bandsaw blade be sharpened?
It often makes sense to replace a dull blade with a new one, but you can sometimes get the best value out of merely sharpening an old blade instead of replacing it altogether. You should typically be able to get two to three sharpenings before you need to change your blade completely.
Are bandsaw blades worth sharpening?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.
How many TPI does a bandsaw blade need?
For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
How do you measure a TPI on a bandsaw blade?
To avoid stripping teeth, always have a minimum of three teeth in the work surface How to measure TPI: Measure 1 or 2 inches along the blade from the center of the gullet. Count the number of teeth in that space. This is the TPI.
What does DPI mean on a bandsaw blade?
Home / Blog / Hints & Tips / Band Saw Blade Teeth Per Inch (TPI) Chart. You must select the correct Teeth Per Inch (TPI) for the thickness of material you are cutting.