Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods, plastics, and non-ferrous metals. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use. 20 – 24 variable to cut 1/16″ to 1/4″ thick material, * 14 – 18 variable to cut 1/8″ to 3/8″ thick material, * 10 – 14 variable to cut 3/16″ to 7/16″ thick material, * 8 – 12 variable to cut 1/4″ to 1/2″ thick material, * 6 – 10 variable or 6 Hook to cut 5/16″ to 5/8″ thick material, * 5 – 8 variable or 6 Hook to cut 3/8″ to 1″ thick material, * 4 – 6 variable or 6 Hook to cut 1/2″ to 2″ thick material, * 3 – 4 variable or 4 Hook to cut 3/4″ to 4-1/2″ thick material, * 3 Hook to cut 1″ to 6″ thick material, * 2 Hook to cut 2″ to 12″ thick material.
93 1/2 metal bandsaw blades Related Question:
What size blade does a Harbor Freight bandsaw take?
93″ x 1/2″ Bandsaw Blade – 14 TPI.
Can you put a metal blade on any bandsaw?
Wood bandsaws run at too high a speed. Even just changing to a metal cutting blades will eat blades up fast if your cutting anything thicker than 20 ga. aluminum.
How thick of metal can a bandsaw cut?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
How do I choose a metal cutting bandsaw blade?
In general the following rule applies to choosing the speed of your bandsaw blade: The harder the material, the slower the speed; conversely, the softer the material, the faster the speed. The faster the speed, the finer the finish produced on the cut surface.
What is the length of a 14 bandsaw blade?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
Can a bandsaw cut hardened steel?
Carbide band saw blades provide high wear resistance and toughness when cutting a variety of applications such as: case hardened steels, spring steels, high speed steels, nickel based alloys, case hardened steels, composite graphite, high nickel alloys, titanium, inconnel, and other exotic metals.
What speed should you cut metal with on a bandsaw?
To cut steel, you’ll need to run the machine at a much slower speed — about a hundred feet per minute. A machine running at this speed might look like it’s running too slowly, but running it any faster almost guarantees that you’ll damage the blade.
How long should a metal bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
What is the difference between a wood band saw and a metal band saw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
What is the best TPI for cutting metal?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
How do I know what size bandsaw blade I need?
In inches, determine the radius of each wheel, by measuring from the center to the outside of the wheel. Apply the following formula: (R1 x 3.1416) + (R2 x 3.1416) + (2 x C) = Saw blade length. Put a strip of tape on the floor to mark a starting point.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
What size blade does a 18 inch bandsaw take?
133 inch Band saw Blades to fit 18 Jet Bandsaw, 18 Craftsman.
Can you use a metal bandsaw on wood?
Cutting wood on a metal bandsaw is possible, but it would be tedious and slow, and likely would not produce a decent quality of cut. In addition, bandsaw blades for cutting wood are designed much differently than bandsaw blades for cutting metal.
What’s the difference between bandsaw blades?
Bandsaw blades differ in thickness, width, length, and tooth configuration. Length varies by machine, but the size of your saw’s wheels typically determines thickness and width: Smaller machines (9–12″ wheels) need thinner blades to prevent breaking the welds. They also accept only narrow blades, often 1⁄ 2 ” or less.