Bandsaw blades are classified by composite makeup, namely Carbon, Bi-metal, and Carbide-tipped blades. Both are carbon steel bandsaw blades available for use with most any bandsaw machine. Flex-Back Carbon Steel Blades are made from carbon steel with a flexible back that is suitable for absorbing contour cutting stresses.
Carbon Flexback Blades – These bandsaw blades are made from a solid piece of carbon steel with a flexible back. Carbon Flexback blades are a low cost alternative on easy to cut material. Carbon Flexback blades have an excellent fatigue factor to give long saw blade life on bandsaws running at high speed, cutting non-ferrous metal, and wood.
These heavy duty, durable, commercial grade band saw blades are for industrial woodworking, diy and professional craftsmen. Tooth Hardness: 62-63rc Back Hardness: 28-32rc Regular, Skip, and Hook shape teeth Raker set: left straight pattern. Cuts hard/soft wood, plastic, mild steel and non-ferrous metal.
We will build your Q101 Flex Back Carbon Band Saw Blade to your requirements. Made from Carbon Steel with a flexible back, Q101™ Flex Back Carbon is ideal for economical cutting on easy-to-machine ferrous or nonferrous metal and wood. Ideal for projects in the home woodworking shop, a Q101 Series Flex – Back Carbon Band Saw Blades combine economical cutting with the reliability and strength of a powerful band saw blade.
Dakin-Flathers Saw37C bandsaw range is a collection of some of the most precise and durable bandsaws in the world. Our Saw37C Flexback carbon bandsaw blades are produced to provide more reliable cutting performance, increased fatigue resistance, and tougher teeth than other leading bandsaw blades. Call Dakin-Flathers on +44 1977 705 600 or contact us online to find out exactly how Saw37C Flexback carbon bandsaw blades can work for you.
what is a flexback bandsaw blade Related Question:
What is flexible back blade?
Flex-Back Carbon Steel Blades are made from carbon steel with a flexible back that is suitable for absorbing contour cutting stresses. Heat-treated teeth help retain their sharp edge.
What are the three main types of bandsaw blades?
There are three basic tooth styles in bandsaw blades: regular, skip and hook. Regular tooth blades have proportionally spaced teeth and are ideally suited for general-purpose cutting and contour sawing. Regular blades are ideal for cutting thin materials with a fine finish.
What is a resaw bandsaw blade?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
What is an M42 bandsaw blade?
The MARATHON® M42 is the ultimate economic band saw blade and stands for a broad application spectrum at a consistently high quality. The high-quality features of MARATHON are now even more flexible thanks to the expansion of the product range, for use with smaller diameters and profiles to large full materials.
How fast should a bandsaw run?
Bandsaw: Speeds. A common speed for the bandsaw is about one thousand feet per minute. Wood can effectively be cut at much higher speeds, up to and over five thousand feet per minute, but you should keep it slower because it’s safer.
What is a friction saw?
Definition of friction saw : a toothless circular saw used for cutting metals or other materials by fusion in the cut due to frictional heat.
How do I know what size bandsaw blade I need?
In inches, determine the radius of each wheel, by measuring from the center to the outside of the wheel. Apply the following formula: (R1 x 3.1416) + (R2 x 3.1416) + (2 x C) = Saw blade length. Put a strip of tape on the floor to mark a starting point.
What’s the difference between bandsaw blades?
Bandsaw blades differ in thickness, width, length, and tooth configuration. Length varies by machine, but the size of your saw’s wheels typically determines thickness and width: Smaller machines (9–12″ wheels) need thinner blades to prevent breaking the welds. They also accept only narrow blades, often 1⁄ 2 ” or less.
What size bandsaw do I need for resawing?
To get started with resawing, I recommend a band saw of sufficient power and with a large depth of cut. Any motor smaller than 1hp and depth of cut less than 10″ will limit your effectiveness. (Some 14″ band saws have about a 6″ maximum cutso you’d be limited to a 12″ wide book-matched panel or less.)
How many teeth do you need to resaw a blade?
Typically, a wide 3-tooth-per-inch (tpi) blade provides the perfect blend of aggressive yet smooth cut and sawdust evacuation that resawing requires.
How much tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
How high can a bandsaw cut?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
What RPM should a metal bandsaw run?
You want the blade running at about 75 RPM for steel, 150 max. Any faster and you will work harden as you cut (due to heat build up) and fry your blade.