In order to determine bandsaw blade length for your saw, please reference our Bandsaw Blade Lengths & Manufacturers page for a list of common saws and sizes. If you cannot find your saw model or are unable to locate a manual, Detroit Band Saw can teach you how to determine bandsaw blade length. If you do not have an existing blade, there is a mathematical equation to help determine saw blade length in inches.
There are three different ways to measure the length of a bandsaw blade. Stand the blade hoop up on the strip of tape, and use a pen to mark a line on the inside of the blade and onto the tape. Roll the blade in a straight line for one rotation – until the mark on the inside of the blade hits the floor.
If you want a good blade for the task, check out the Olson Saw Hook Saw blade works well thanks to its easy to use and durable nature. You know how to calculate your band saw’s blade length, so we’ll look at how to get the width and depth measurements. Also known as the thickness, the depth of your band saw’s blade is easy to measure with a tape measure.
“We don’t know what bandsaw blade length fits your bandsaw either, but fortunately it’s easy to find out. It’s especially easy, of course, if you have an old bandsaw blade that fits the saw-just measure its length. Make a mark on the inside of the blade, and align it with the zero point on a measuring tape laid on the floor. Roll the blade along the tape until the mark reaches bottom center again, and there’s your measurement. The exact measurement is just a target, by the way – if your bandsaw blade measures 114-5/8″, you don’t have to special-order that exact length. If you don’t have a blade to measure, or if you simply want to know if a 93″ blade will fit a saw rated to handle 92”, here’s how to determine the range of lengths you can expect to mount on your saw. Bandsaw Blade length listed in owner’s manuals is usually the average of these two figures, or a convenient whole number somewhere in the vicinity.
When trying to figure out how to determine bandsaw blade size, it is important to know the job that will be performed using that particular saw blade. If there is no blade to measure, or there is need of a new blade that may or may not properly fit the bandsaw machine, then it becomes necessary to determine the range of lengths the machine can be expected to mount. These procedures are the best way to determine the right size bandsaw blade for a particular bandsaw machine.
If you lost your bandsaw owner’s manual and don’t have a blade to measure from, or if you’ve added riser blocks, put this simple math formula to work to determine your tool’s blade length:Blade length = +. Key_A= distance in inches between bandsaw wheel centers when the upper wheel is midway in its adjustment rangeB= bandsaw wheel diameter.
how to tell bandsaw blade size Related Question:
How long is a 14 inch bandsaw blade?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
What size blade does a 12 inch bandsaw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel. 0.50 (1/2 in.)
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
What’s the difference between bandsaw blades?
Bandsaw blades differ in thickness, width, length, and tooth configuration. Length varies by machine, but the size of your saw’s wheels typically determines thickness and width: Smaller machines (9–12″ wheels) need thinner blades to prevent breaking the welds. They also accept only narrow blades, often 1⁄ 2 ” or less.
What size blade does a 18 inch bandsaw take?
133 inch Band saw Blades to fit 18 Jet Bandsaw, 18 Craftsman.
What size blade does a 14 inch Craftsman band saw take?
99-3/4 inch Band saw Blades to fit 14 inch Sears Craftsman Bandsaw 922401.
How do you measure a bandsaw?
To determine the size of a band saw, measure the distance from the blade to the throat. That measurement is a little more than the largest piece of wood the band saw can handle. The band saw’s large circular blade is placed around the tool’s top and bottom wheels. Some band saws have built-in fences.
What is the pitch of a sawmill blade?
The most commonly-used “all-purpose” tooth spacing is 7/8” (1.1 TPI pitch).
How thick is a sawmill blade?
The plate of a circular saw blade is typically 1/8 inch to 1/4 inch thick.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
What does TPI mean on a bandsaw blade?
You must select the correct Teeth Per Inch (TPI) for the thickness of material you are cutting.
What size blade does a Craftsman bandsaw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations. The blade width determines how tight a curve that can be cut.
What is a raker tooth bandsaw blade?
A raker blade has an odd-numbered tooth sequence with a uniform set angle. A basic, three-tooth sequence is left, right, and straight, or unset. The straight tooth is the raker tooth.