“Basically the standard and correct answer I think is you want some form of a well built Delta or Delta style 14” bandsaw. The older the Delta saw, probably the better, as long as the motor is good. It’s really handy, I have the Delta in my dustroom and the little sears can sit on my bench when I need it, with the little blade it’s very good for cutting curves.
There are many uses for a table saw in guitar building. “A joiner is used to put a straight edge on a piece of wood. This can be especially helpful if the piece of wood is three feet long or more. It is also used to flatten one face of a board before putting through the planer. If you buy rough cut lumber both faces are bump and far from smooth. One face will need to be flattened before it goes in the planer or there will be trouble. For guitar building an 8” model will suffice. “For guitar building a 12” table top model will suffice.
best bandsaw for cutting guitar bodies Related Question:
What size band saw for guitar?
Any 14″ band saw should be adequate to the guitar making tasks since the wood we use in guitar making is relatively small.
How thick can a 9 inch bandsaw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
What is the difference between wood cutting and metal cutting bandsaw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
Where should you never place your hands while cutting on the bandsaw?
Always keep your hands on the sides of the blade while operating. never in front of blade!
What size bandsaw is best?
For a hobbyist, a 12″-14″ bandsaw is the ideal size. This size saw will provide plenty of power and a good deal of resawing capability. A professional will be better served with an 18″ bandsaw for a larger resawing capability. Choosing a 14″ band saw would provide plenty of power in a smaller footprint.
What does 14 mean on a bandsaw?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
How high can a bandsaw cut?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
Can I put a metal cutting blade on my band saw?
Typically if you run a metal blade on a wood bandsaw the excessive speed (2000 sfpm+) of the wood saw will knock the teeth off of your metal cutting blade in a hurry. You could make it work, but you would have to slow the blade drive wheel way down. Think 250 sfpm to 80 sfpm.
Can I use metal cutting blade to cut wood?
You can use a metal blade to cut wood. A circular saw blade cut metal in a sluggish rotational speed of 25m/s. They are driven by a motor having high power and an A/C vector drive. They are long lasting and non-reusable.
Can you use a bandsaw for metal?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
What side of the band saw should you never stand on?
4. Do not allow anyone (including yourself) to stand on the right side of the bandsaw while it is running. A broken blade is likely to fly in that direction.
What is the number 1 safety rule of the band saw?
Safety Rules Safety glasses are required. Never clear small pieces while blade is moving. Never adjust saw or setup while saw is running. Never cross arms.
How do I choose a bandsaw?
The two main things to consider when choosing a band saw are the depth of cut and the throat. The saw’s depth of cut is the distance from the table to the upper blade guides. Many band saws are marketed on this feature alone, which tells the prospective buyer how thick of stock can be cut using the band saw.
How much HP does a bandsaw need?
A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.