For cutting out bowl blanks and rough resawing, you want a bimetal blade. This is the same blade that the protable bandsaw mills use. The Carbide tipped blades are for cutting veneers, and fancy resawing of boards that you want to bookmatch for flat work.
07-27-2012, 5:52 AM #3 Suffolk machine, who makes timberwolf blades, has a blade designed for cutting green wood as well. I’ve always been happy with the timberwolf blades I’ve used, but have not used the green wood blade. 07-27-2012, 9:11 AM #8 I use a 3/8″ 3tpi, raker set blade.
A bandsaw will make many cuts with precision and speed-when equipped with the right blade for the application. Bandsaw blades differ in thickness, width, length, and tooth configuration. Every time you change from one bandsaw blade width to another, you have to reset the saw’s tracking, tension, and blade guides.
Select Product Options Here Length: Select Length 70-1/2 inch 72 inch 73 inch 80-1/2 inch 82 inch 89-1/2 inch 93-1/2 inch 95 inch 98 inch 99-3/4 inch 100 inch 101 inch 104 inch 105 inch 106 inch 111 inch 112 inch 113 inch 115 inch 116 inch 118 inch 120 inch 123 inch 124 inch 125 inch 126 inch 128 inch 130 inch 131-1/2 inch 132 inch 133 inch 136 inch 137 inch 140 inch 142 inch 143 inch 145 inch 149 inch 150 inch 153 inch 154 inch 155 inch 156-1/2 inch 158 inch 160 inch 161 inch 162 inch 165 inch 183 inch. Our 3/8 inch wide WoodTurner’s Bandsaw Blade, with its 3 TPI, alternate set tooth pattern & stout band thickness of.032 inch, is just the blade for the task. The 3/8 inch wide band allows a cutting radius as small as 1-1/2 inch.
I’m a fan of Timberwolf blades and their website offers various blades for green wood, resawing, and nearly all types of cuts. Have your say… Forum Topics Woodworking Skill ShareYour woodworking skills are displayed for several lifetimes in each project. Show us your jigs, share your tips, strategies and, of c… 1908 Wood & LumberDifferent wood requires different woodworking strategies – from cutting to finishing.
“For Green wood buy the cheapest 1/2” 3 tooth blade you can get. Green wood blanks are often not the most stable on the bandsaw table and if you get any rocking at all it can bind up and bend the blade. Now I buy $6 blades from my local blade sharpener and I get a much longer life out of them than I did my expensive timber wolf blades.
best bandsaw blade for cutting green wood Related Question:
What type of blade is most effective for cutting through wood?
Ripping solid wood: Use a 24-tooth to 30-tooth blade. You can use 40-tooth to 50-tooth multipurpose blade as well, but it will take longer. Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade.
What bandsaw blade is best for resawing?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
What is a skip tooth bandsaw blade used for?
Skip tooth blades have widely spaced teeth at a 0 degree rake angle to prevent clogging when cutting soft wood, non-ferrous metals and plastics. Hook tooth blades have a deeper gullet—that is, larger teeth—and a positive 10 degree rake angle. This helps the blade to feed into the material more aggressively.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.
What are carbide saw blades used for?
Carbide saw blades are used by woodworkers and craftsmen for precision cuts for projects that require minimal to no tearout, such as cabinet making or furniture building. Circular carbide tip blades are generally used with miter and table saws.
How many teeth should my saw blade have?
TPI is the number of teeth the blade has per inch. If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
Why is my bandsaw burning the wood?
A majority of issues with wood burning is because of a dull saw blade. These blades may not be sharp enough to efficiently cut the wood, and thus create enough friction to heat and burn the wood. What is this? Dull blades make it more challenging to cut, which causes friction as you pass the wood through.
Can any bandsaw resaw?
Just about any bandsaw will do acceptable resawing. For example, all the cuts made in this story were done on an inexpensive, 14-in. bandsaw with a 3/4-hp motor. All we did to the saw was add a riser block to increase its capacity.
What’s the difference between bandsaw blades?
Bandsaw blades differ in thickness, width, length, and tooth configuration. Length varies by machine, but the size of your saw’s wheels typically determines thickness and width: Smaller machines (9–12″ wheels) need thinner blades to prevent breaking the welds. They also accept only narrow blades, often 1⁄ 2 ” or less.
What does resaw mean on a bandsaw?
A resaw is a large band saw optimized for cutting timber along the grain to reduce larger sections into smaller sections or veneers. Resawing veneers requires a wide blade – commonly 2 to 3 inches (52–78 mm) – with a small kerf to minimize waste.
How do I know what size bandsaw blade I need?
In inches, determine the radius of each wheel, by measuring from the center to the outside of the wheel. Apply the following formula: (R1 x 3.1416) + (R2 x 3.1416) + (2 x C) = Saw blade length. Put a strip of tape on the floor to mark a starting point.
How many teeth per inch should a bandsaw blade have?
The general rule of thumb is: For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.
What saw blade makes the smoothest cut?
With fewer spaces between the teeth, crosscut blades remove less material, resulting in a smoother cut. It also means it takes these blades longer to move through wood. Crosscut blades are the go-to choice for finish carpentry and other applications that require precision and a smooth finish.4 days ago
How much tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
Can a carbide blade cut wood?
Carbide-tipped blades for portable circular saws are generally of the all-purpose variety, suitable for cutting all kinds of wood, including plywood and particleboard as well as hardboard, wallboard and plastics. In general, the more teeth a blade has, the smoother it will cut.