As a bowl turner I like to do most of my bowl preparation with some jigs I made for my bandsaw that will take a 2′ or 3′ log and I can use it to cut it down the center of the pith or cut it on each side of the pith so there is no pith in my bowl blanks, I usually will put on an 1″ or 1-1/4″ bandsaw blade and spend the day ripping my logs in half. I experimented with 3/8″, 1/2″ 5/8″ bandsaw blades for cutting bowl blanks. If I could find some good bandsaw blades I wanted to negotiate a discounted price for anyone who might need one or two from both our facebook group, Wood Turning Basics https://www.
1 – The bandsaw blade length is specific to each model bandsaw. Watch where the bandsaw blade is contained and slowly free it from each section of the bandsaw. When the blade is up to speed, I feed in the left edge of the green wood bowl blank and begin following the edge of the cardboard circle, without cutting the cardboard.
Currently running a Timberwolf 3/4 wide blade with 2 teeth per inch. The blade I am running now has cut about 70 green bowl blanks and still cuts good. Does a great job, just make sure you watch your fingers.
Process logs into useable turning blanks, cut pen blanks to size, cut corners off a bowl blank… the uses of a band saw are too many to list. We have shop tested all the band saws and accessories we carry so you can buy with confidence.
best size bandsaw for woodturning Related Question:
What is a good size for a bandsaw?
For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
Is a 14 bandsaw big enough?
Re: Bandsaws: 14″, or is bigger better? If you are not going to do any resawing, then a 14″ will do just fine. If you may be cutting out bowl blanks for a lathe, then you should consider a riser to get more vertical clearance.
What size band saw for blank bowls?
While a 17” bandsaw can easily handle a bowl blank that is eight inches tall and 16 or 18” in diameter, a 14” bandsaw may only have a cutting depth of five or six inches. With a six-inch cutting depth, or height, a 14” bandsaw cannot handle blanks taller than six inches.
How do I choose a bandsaw for woodworking?
The two main things to consider when choosing a band saw are the depth of cut and the throat. The saw’s depth of cut is the distance from the table to the upper blade guides. Many band saws are marketed on this feature alone, which tells the prospective buyer how thick of stock can be cut using the band saw.
How thick of wood can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
What is a 14-inch bandsaw?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
Is 1 hp enough for a bandsaw?
1 Horespower is a lot of power, it is aproximately 50% more work than a horse can do on a long term basis, and aproximately 6 times what a person can do. A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
What is the throat on a bandsaw?
The throat is the distance from the blade to the vertical frame section of the body of the saw. This distance determines the width of cut that can be completed on the band saw. The throat on a free-standing cabinet band saw typically exceeds the 12 to 14-inch throat of smaller, bench-top models.
What is resawing on a bandsaw?
Bandsaw Resawing from the beginning: resawing is cutting a sawn plank of wood into thinner planks on a bandsaw. Thus the cut runs through the plank’s width, which distinguishes bandsaw resawing from ordinary bandsaw rip cuts where the blade runs through the stock’s thickness.
What is a band saw used for in woodworking?
A bandsaw (also written band saw) is a power saw with a long, sharp blade consisting of a continuous band of toothed metal stretched between two or more wheels to cut material. They are used principally in woodworking, metalworking, and lumbering, but may cut a variety of materials.
How thick of wood can I cut with band saw?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
How thick can a 12 band saw cut?
A twelve-inch band saw is adequate for most home workshop jobs, typically cutting up to a six-inch capacity. (Cabinetmakers would do well to opt for a larger one, perhaps one with a sixteen- or twenty-inch throat.)
How long is a 14 bandsaw blade?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
What do band saw sizes mean?
The size of a band saw is given in inches, with 14-inch being the most common. The size refers to the distance between the blade and the saw’s throat, or the column that supports the upper wheel. Band saws range in size (and price) from 10-inch benchtop machines to 24-inch freestanding ones for professional shops.
What is the difference between a band saw and a scroll saw?
Now, one of the really big differences is that the scroll saw’s blade moves up and down, whereas the band saw’s blade moves in a continuous downward motion. Band saws also differ in the thickness and size of materials which they can handle.