Every craftsman has a special relationship with his tools, and finding the right ones is a very important part of creating your workshop. The handle has changed over the years, but the blade is very short because I used it so much. If you want to see all of thee tools in action, check the video below and let me know what you think about them!
The wonderful smells of a violin begin with the varnish and wood until the built up odors of the centuries collect inside and emmanate from the ff holes along with the sound. Note the dark growth lines of winter compared to the light wood in between which is summer wood. The outline of the violin is sawn out of the wood for both top and back plates.
Mark the smoothed outside of each rib, and proceed to thicknessing the inside of the ribs. The finished thickness should be a consistent 1.2mm both across the width and down the entire length of the rib. The inside of the rib doesn’t need to be finished to the same degree as the outside, and often due to thickness concerns is left with visible tool marks.
Mostly ignoring the results of generations of tool and technological advancement, a violin maker is interested in an older tradition, and uses tools that were optimized hundreds of years ago. The hand tools a violin maker uses are special, often specialized, and if you put in the work to shape, sharpen, and use them well, they reveal a surprising truth: It’s almost always faster and more efficient to use the old tools that the Cremonese makers were using, back before all these lovely jointers and CNC tables existed. SPECIALIZED TOOLS. Along with general roughing and shaping tools, there are tools made specifically for steps in the process at hand.
The Wood Selection Process…. …How the wood you choose affects the completed violin. Wood grown at high altitude has the closer grains spacing needed for instrument making and if grown in a severe winter area the wood will grow strong to stand the strains of winter storms and cold….Spruce wood is light for its strength and transmits sound at a high speed. Again, the thicker side of the trunk is probably the best bet for violin plates; this being the wood from the sunny side of the tree trunk….The wood is normally naturally cured by stacking, putting sticks between the pieces to promote air circulation, and keeping it inside for a period of years; at least five years, with twenty years being even better.
A band saw can make significant cuts on considerable solid woods and create split cuts in hardwoodsIf you do not use the blade properly, a band saw can produce coarse edge cuts that make aggressive slices. A jigsaw is like a band saw but with thickness limits. It is ideal for curved and straight cutsA jigsaw cannot manage massive slices of furniture and projects of similar weightA jigsaw is excellent for rough cuttingsRepairing a jigsaw is trickyIt has a LED light for visibility while workingA jigsaw is not as durable as band saw and scroll saw.
Use a pencil to go round that outline using a washer to create a distance of 2mm between the ribs and the edge of the violin. Then cut out the back of your violin using a bandsaw and file it. Then attach the neck on to the violin body using a mortise and tenon joint.
best bandsaw blade for cutting veneer Related Question:
What kind of band saw blade should I use?
Use coarse tooth blades (2 or 3 TPI) for re-sawing and cutting thicker materials. For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
Is more teeth on a saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.
Do I need a scratch coat for veneer stone?
Step 3: Scratch Coat A scratch coat will be needed when metal lath is used. This step is not necessary when applying stone veneer to a cleaned concrete, masonry, or stucco surface.
What is ATB saw blade?
Alternate Top Bevel (ATB) This means that the blade teeth alternate between a right- and left-hand bevel. This configuration yields a smoother cut when crosscutting natural woods and veneered plywood.
How do you prevent Tearouts when routing?
To avoid tear-out, cut the piece oversize, rout the curved edge, and then rout the piece to final size. When using a template to create a workpiece, cut away the waste material as close to the cutline as possible.