The size of the bandsaw wheel has nothing to do with the resaw capability. All of the 14″ & 15″ bandsaws have the same rounded look. There are very few bandsaw specific parts on “the import” compared to other saws.
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. Tim Inman: Following from Rob’s answer regarding wheel size, you also need to allow for the frame of the saw, and some safety gear, which reduces the actual cutting depth of a band saw to a couple of inches less than the wheel diameter. Rod Burrow, RIKON Power Tools: Band saws are sized by both wheel diameter and throat depth.
Many 14″ saws with a 6″ riser will cut about 12″ but obviously the rest of the saw would have to be up to it. A saw with fabulous cut quality that struggles through 1″ material is of no more use to me than a saw with a substantial cutting height and plenty of power that wanders unpredictably through the cut. ” So a 14″ band saw will give you a 14″ cut between the blade and the backbone of the saw.
To determine the size of a band saw, measure the distance from the blade to the throat. The band saw’s large circular blade is placed around the tool’s top and bottom wheels. The throat on a free-standing cabinet band saw typically exceeds the 12 to 14-inch throat of smaller, bench-top models.
In order to determine bandsaw blade length for your saw, please reference our Bandsaw Blade Lengths & Manufacturers page for a list of common saws and sizes. If you cannot find your saw model or are unable to locate a manual, Detroit Band Saw can teach you how to determine bandsaw blade length. If you do not have an existing blade, there is a mathematical equation to help determine saw blade length in inches.
There are three different ways to measure the length of a bandsaw blade. Stand the blade hoop up on the strip of tape, and use a pen to mark a line on the inside of the blade and onto the tape. Roll the blade in a straight line for one rotation – until the mark on the inside of the blade hits the floor.
If you want a good blade for the task, check out the Olson Saw Hook Saw blade works well thanks to its easy to use and durable nature. You know how to calculate your band saw’s blade length, so we’ll look at how to get the width and depth measurements. Also known as the thickness, the depth of your band saw’s blade is easy to measure with a tape measure.
how are bandsaws measured Related Question:
What does a 14-inch bandsaw mean?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
What size band saw do you need?
For a hobbyist, a 12″-14″ bandsaw is the ideal size. This size saw will provide plenty of power and a good deal of resawing capability. A professional will be better served with an 18″ bandsaw for a larger resawing capability. Choosing a 14″ band saw would provide plenty of power in a smaller footprint.
How thick can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
Do I need a 14 inch bandsaw?
For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
What size blade does a 14 inch bandsaw take?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
How do you measure a bandsaw on a wheel?
You can easily determine the size of your band saw wheel by measuring its diameter. Simply subtract 2 inches from this total, and you have determined the size of the band saw tire you need as a replacement.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
What is a raker tooth bandsaw blade?
A raker tooth set has one tooth going to the left, one to the right, followed by a straight, or unset, tooth, which is called a raker. An alternate tooth set has one tooth going left, one going right, then left, right, etc.
What is the difference between a band saw and a scroll saw?
Now, one of the really big differences is that the scroll saw’s blade moves up and down, whereas the band saw’s blade moves in a continuous downward motion. Band saws also differ in the thickness and size of materials which they can handle.
How much HP does a bandsaw need?
A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
How thick can a 12 band saw cut?
A twelve-inch band saw is adequate for most home workshop jobs, typically cutting up to a six-inch capacity. (Cabinetmakers would do well to opt for a larger one, perhaps one with a sixteen- or twenty-inch throat.)
Is 14 bandsaw big enough?
If you are not going to do any resawing, then a 14″ will do just fine. If you may be cutting out bowl blanks for a lathe, then you should consider a riser to get more vertical clearance.
What do band saw sizes mean?
The size of a band saw is given in inches, with 14-inch being the most common. The size refers to the distance between the blade and the saw’s throat, or the column that supports the upper wheel. Band saws range in size (and price) from 10-inch benchtop machines to 24-inch freestanding ones for professional shops.
What is a throat on a band saw?
The throat is the distance from the blade to the vertical frame section of the body of the saw. This distance determines the width of cut that can be completed on the band saw. The throat on a free-standing cabinet band saw typically exceeds the 12 to 14-inch throat of smaller, bench-top models.
What size blade does a 12 inch bandsaw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations.