I got the bearing out of the upper14″ wheel by heating the wheel in the oven and thenswapping out the bearing while the wheel was hot. Theshaft rides on two bearings that are pressed in the inside and outsideof the frame casting I manged to removed the shaft and one bearing by knocking theshaft out with a 2×4. One bearing stayed on the shaft and came out withit, but I can’t get the other bearing out. I can get the bearing off the shaft but the other bearing is sitting in the saw.
how to remove bandsaw bearings Related Question:
What is a thrust bearing on a band saw?
Default Title – $9.99. Maintaining thrust bearings in good working order prevents backward movement of the bandsaw machine that could result in misalignment and/or damage to your blade.
What is the purpose of the blade guides on a bandsaw?
Bandsaw blade guides keep the bandsaw blade on track while cutting through materials. Blade guides should be set above and below the saw table to help reduce vibration by holding the bandsaw blade in place while cutting. This assures a precise and quality cut.
Can you change a wheel bearing yourself?
Changing your own wheel bearings is considered an intermediate job that can be done at home, but will need some speciality mechanic tools.
Can I just replace the wheel bearing and not the Hub?
On some cars, you can just replace the bearing and call it a day. On others, the hub assembly must be removed and replaced. The most difficult type involves removing the hub assembly and setting it in a press. If you’re not sure what type of wheel hub assembly you have, stop by or give your local Pep Boys store a call.