Once you’ve achieved a nice smooth texture, finish your bandsaw box with your favorite topcoat, laquer or stain. Kyle’s bandsaw box was crying out for some small knobs to finish off the drawers. That’s one of the best parts about creating your own bandsaw box.
how to make a bandsaw box from a log Related Question:
How deep should a bandsaw box be?
Step 1: Bandsaw Box Blank The depth can vary but I like mine to be about 4″ thick. In this example I’m using Baltic birch plywood as my core with an exotic wood on the faces. You’ll glue up all the pieces with wood glue on the faces of each piece. Use plenty of wood glue make sure the entire surface is covered.
What is a band saw box and how is it constructed?
Band saw boxes are boxes made out of wood using only a bandsaw for cutting them out. The wood may be a solid block, a laminated block or a log from the woodpile. Whereas most boxes have straight sides and square corners, band saw boxes have virtually no restrictions as to shape.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
Can a bandsaw cut wood?
With the correct blade, a band saw can cut wood or metal, in either curves or straight lines. Blades come in a variety of widths and tooth counts. Narrower blades are good for tighter curves, while wider blades are better at straight cuts.