In order to determine bandsaw blade length for your saw, please reference our Bandsaw Blade Lengths & Manufacturers page for a list of common saws and sizes. If you cannot find your saw model or are unable to locate a manual, Detroit Band Saw can teach you how to determine bandsaw blade length. If you do not have an existing blade, there is a mathematical equation to help determine saw blade length in inches.
There are three different ways to measure the length of a bandsaw blade. Stand the blade hoop up on the strip of tape, and use a pen to mark a line on the inside of the blade and onto the tape. Roll the blade in a straight line for one rotation – until the mark on the inside of the blade hits the floor.
“We don’t know what bandsaw blade length fits your bandsaw either, but fortunately it’s easy to find out. It’s especially easy, of course, if you have an old bandsaw blade that fits the saw-just measure its length. Make a mark on the inside of the blade, and align it with the zero point on a measuring tape laid on the floor. Roll the blade along the tape until the mark reaches bottom center again, and there’s your measurement. The exact measurement is just a target, by the way – if your bandsaw blade measures 114-5/8″, you don’t have to special-order that exact length. If you don’t have a blade to measure, or if you simply want to know if a 93″ blade will fit a saw rated to handle 92”, here’s how to determine the range of lengths you can expect to mount on your saw. Bandsaw Blade length listed in owner’s manuals is usually the average of these two figures, or a convenient whole number somewhere in the vicinity.
If you lost your bandsaw owner’s manual and don’t have a blade to measure from, or if you’ve added riser blocks, put this simple math formula to work to determine your tool’s blade length:Blade length = +. Key_A= distance in inches between bandsaw wheel centers when the upper wheel is midway in its adjustment rangeB= bandsaw wheel diameter.
If you want a good blade for the task, check out the Olson Saw Hook Saw blade works well thanks to its easy to use and durable nature. You know how to calculate your band saw’s blade length, so we’ll look at how to get the width and depth measurements. Also known as the thickness, the depth of your band saw’s blade is easy to measure with a tape measure.
When trying to figure out how to determine bandsaw blade size, it is important to know the job that will be performed using that particular saw blade. If there is no blade to measure, or there is need of a new blade that may or may not properly fit the bandsaw machine, then it becomes necessary to determine the range of lengths the machine can be expected to mount. These procedures are the best way to determine the right size bandsaw blade for a particular bandsaw machine.
how to find bandsaw blade length Related Question:
How long is a 14 inch bandsaw blade?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
How long is a 12 inch bandsaw blade?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt.
How long is a 10 bandsaw blade?
POWERTEC Band Saw Blade – 63.5 ” x 1/4 ” x 14TPI for Craftsman 10 ” Band Saw 21460 and 21461.
How long is an 18 bandsaw blade?
133 inch Band saw Blades to fit 18 Jet Bandsaw, 18 Craftsman.
Can I use a longer bandsaw blade?
Try a blade of 114” or 115” length; it’s more than likely that either one will work just fine. Most bandsaws will accept a range of blade lengths, sometimes with as much as 2” difference between the shortest and longest blades that the saw can use.
What size blade does a 14 inch Craftsman band saw take?
99-3/4 inch Band saw Blades to fit 14 inch Sears Craftsman Bandsaw 922401.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel. 0.50 (1/2 in.)
What size blade does a Craftsman 14 bandsaw?
Precise and Powerful Cutting Perfect for cutting intricate details and smooth curves that other saws can’t, this saw features a long 100″ blade with 2 speeds to deliver a perfect cut every time.
What size blade does a Craftsman bandsaw take?
99.75 x3/8 x 4 TPI Carbon Bandsaw Blade Fits Craftsman 14” Bandsaw 124.32607.
What is a raker tooth bandsaw blade?
A raker tooth set has one tooth going to the left, one to the right, followed by a straight, or unset, tooth, which is called a raker. An alternate tooth set has one tooth going left, one going right, then left, right, etc.
Does craftsman make a bandsaw?
OVERVIEW. One of the most versatile tools you can have in your shop, the Craftsman 9 in. bench top band saw makes fast, precise cuts in hardwood or softwood.
What is a band saw Sander?
A band saw is basically a “curve cutting” machine. It is not capable of doing inside cutting. For inside cutting use our Dewalt 20 inch Scroll Saw. The Craftsman Band Saw-Sander is not only capable of the usual band saw operations, but it can he converted into a sander as well.