Create cuts up to 3-1/2 inches deep and 9 inches wide. Uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in size. The design of this saw uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in width for both intricate and powerful cuts.
The WEN 3939 benchtop bandsaw holds a 2.8 amp motor that can attain a speed of 2460 FPM. It’s not the most powerful motor that you can find on a benchtop bandsaw, yet it’s powerful enough to cut through a variety of applications without struggling. So we’ve had a look into the 3939 benchtop bandsaw by WEN, as well as the next in line, the 3962. If you have a little bit more money to play with, and would like some additional features and more room upon the table you’re working on – the WEN 3962 is the bandsaw you should be looking at.
wen benchtop band saw Related Question:
Can a Wen bandsaw cut metal?
The WEN 4-inch by 6-inch Metal-Cutting Bandsaw makes easy work of brass, aluminum, copper, steel and more. Cut pipes up to 4-1/2 inches in diameter or rectangular materials up to 4 x 6 inches in size.
What does 14 mean on a bandsaw?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
What is a band saw used for?
A bandsaw (also written band saw) is a power saw with a long, sharp blade consisting of a continuous band of toothed metal stretched between two or more wheels to cut material. They are used principally in woodworking, metalworking, and lumbering, but may cut a variety of materials.
What is the difference between a band saw and a table saw?
Instead of the solid, circular plate of steel with carbide teeth on a table saw, the blade of the band saw is exactly that—a narrow, flexible band of steel with teeth formed along one edge. The band saw blade is stretched and driven between two or three wheels.
What can you do with a table top band saw?
A band saw can be used to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. The most common use for the band saw, however, is in cutting irregular shapes. The second most common use is in resawing or ripping lumber into thinner slabs.
Can a meat band saw cut wood?
Blade speeds on meat saws run 3500 SFPM (surface feet per minute) so your speed is fine for wood cutting. anywhere between 3200 and 5000 SFPM is good for resawing. Your HP is light at 3/4 and that’s where you will find your lacking .
Why does my bandsaw blade keep falling off?
Blade Tension Is Too Loose The most common reason why the blade is slipping off is that there isn’t enough tension to keep it on. Blades can slowly become loose after years of wear and tear, and eventually, you’ll need to tighten or replace them.
Can you put a bandsaw blade on upside down?
Typical bandsaw blades can be flipped “inside out” to make the teeth point the other direction. On some knife edge style blades and grit edge blades you can get a fresh sharp cutting edge from a blade this way, just by flipping it inside out.
Are bandsaw blades universal?
Bandsaw blades differ in thickness, width, length, and tooth configuration. Length varies by machine, but the size of your saw’s wheels typically determines thickness and width: Smaller machines (9–12″ wheels) need thinner blades to prevent breaking the welds. They also accept only narrow blades, often 1⁄ 2 ” or less.
How much HP does a bandsaw need?
A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
What is a bandsaw throat?
The throat is the distance from the blade to the vertical frame section of the body of the saw. This distance determines the width of cut that can be completed on the band saw. The throat on a free-standing cabinet band saw typically exceeds the 12 to 14-inch throat of smaller, bench-top models.
What size bandsaw is best?
For a hobbyist, a 12″-14″ bandsaw is the ideal size. This size saw will provide plenty of power and a good deal of resawing capability. A professional will be better served with an 18″ bandsaw for a larger resawing capability. Choosing a 14″ band saw would provide plenty of power in a smaller footprint.
What is difference between scroll saw and band saw?
Now, one of the really big differences is that the scroll saw’s blade moves up and down, whereas the band saw’s blade moves in a continuous downward motion. Band saws also differ in the thickness and size of materials which they can handle.