I finally trashed my several year old HF 1/2″ blade yesterday and need a replacement. I see that Lowes has Bosch brand BS blades in stock locally in 1/4″ and 1/2″. I seem to remember trying them years ago and having some issues, but not sure what and how bad. All the local sources for BS blades have closed and I would rather not order one, but will if need be. I have tried the high dollar blades in the past, and found they were not really worth the money for me, especially in the narrower blades.
They say Bosch on the packaging so maybe…. I’ve used their jigsaw blades and they seem to work pretty well. 01-16-2011, 10:30 AM #2 Same same Lowe’s stores around here carried Vermont American bandsaw blades ’til a few months ago; red package, made in USA. Then the packaging changed. While Lowe’s was moving out the red packages, I picked up a fistfull of 93 1/2″ blades for my bandsaw at prices down to $0.95; metal-cutting blades were higher, but still a bargain.
The blade has finally broken and being Easter weekend I knew ordering one was not going to get me a blade very quickly. I’ve got the new blade cutting much better but it’s still not as nice as the other one was. Get the Band Saw Book used on Amazon It gives great advice on blade tracking, tension, blades choices etc.
In comparison to the rest of the options in this article, Imachinist is a much smaller brand of bandsaw blades that offers large and high-performance bandsaw blades. Enhanced Precision – With its dual bearing blade guide rollers and blade tracking adjustments, the usage of bandsaw blades will give superior results in terms of precision and accuracy than most other sawing or cutting tools. Release the blade tension after using the bandsaw blades to enhance the reliability and longevity in both the bandsaw and its blade.
Regular tooth bandsaw blades are the most common type of saw blades. Skip tooth bandsaw blades are sort of a cross between regular tooth and hook tooth blades. Bandsaw Blade PricingUnder $10: Bandsaw blades in this price range are for the extremely budget-conscious.
Utilisation my band has seen far more than using mine saw of table and this leaf done some better yards. An original leaf still cut but has imagined the one who a hell this Bosch he brota is not very expensive and is always a lot having the good acute leaf informative for any cutting tool. An element has been sent quickly and as announced, but a quality of a leaf has not been that it expected it to them would be that use it a lot of bosch produced in a leaf does not have on resisted almost while some leaves the have the habit to use.
are bosch bandsaw blades any good Related Question:
Are Bosch table saw blades good?
These blades are truly the best-in-class in cutting speed. These circular saw blades are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer.
How long should a bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
Is it worth it to sharpen bandsaw blades?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.
Is more TPI better?
Woodworkers quickly learn that the number of teeth-per-inch (TPI) on the blade has a big impact on the quality of a cut. The general rule of thumb is “the more TPI, the smoother the cut.” The true answer, however, is just a little more complicated than that, as you’ll learn once you understand how saw teeth work.
How many times can a bandsaw blade be sharpened?
It often makes sense to replace a dull blade with a new one, but you can sometimes get the best value out of merely sharpening an old blade instead of replacing it altogether. You should typically be able to get two to three sharpenings before you need to change your blade completely.
How many times can you sharpen a sawmill blade?
You should be able to sharpen your blade two or three times before needing to replace it, but sometimes breakage happens. Blade breakage can result from a range of situations. Common causes of blade breakage include: Dull teeth.
How many teeth per inch should a bandsaw blade have?
The general rule of thumb is: For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.
How much tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
What is a 24 tooth blade used for?
For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy. With a 24-tooth demo blade, you’re getting work done quickly, but you won’t get a near-finished edge.
What does TPI mean on a bandsaw blade?
TPI: The number of teeth per inch as measured from gullet to gullet. 7.
Why is my bandsaw burning the wood?
A majority of issues with wood burning is because of a dull saw blade. These blades may not be sharp enough to efficiently cut the wood, and thus create enough friction to heat and burn the wood. What is this? Dull blades make it more challenging to cut, which causes friction as you pass the wood through.
How long do portable sawmill blades last?
Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well.
How often do you have to change blade on a sawmill?
When operating a band sawmill, a general rule is to replace the bandsaw blade with a sharpened one on average every 1,5 hours of cutting. In the case of cutting dirty wood, this time will be shorter.