I used to be very anti bandsaw and would chop saw everything-now I can’t stand the smell. Currently own two chop saws two portabands, an evolution rage dry cut saw that I never use, a hf 4×6 that marginally works and a klutch 7×12 that I love.
Tjcrawler,I have the milwaukee dry cut saw you have listed as well as a Dayton band saw. The biggest difference is blade life and cost for replacement and sharpening. Band saw blades are cheap compaired to the blade on the milwaukee, which I have 3 blades for now, 1 in use and 1 at the sharpeners and a spare.
I’d like to get a small 5×7 horizontal bandsaw or a dry cut chop saw for steel work. 01-08-2015, 03:07 AM. I’m referring to a dry cut chop saw, not an abrasive blade chop saw. Cold cut saws are expensive and have the coolant mess, however the coolant mess may be okay with some since you dont have the spark or chip mess like with the dry cut and abrasive saws.
I have a Milwaukee 14″ dry cut saw that I actually bought from Northern Tool. If you don’t clamp the material down TIGHT, it crawls as the cut is being made, which is very hard on the blade and results in substandard output. See previous complaint…. That being said, it is nice being able to touch the cut edge of the material almost immediately after cutting without fear of being burned.
4 Re: Horizontal band saw vs. Dry cut chop saw most chop saws are roughly 50 pounds so id go with a portable band saw plus when you can cut long stock without the fuss off loading it into the clamp of a chop saw. 5 Re: Horizontal band saw vs. Dry cut chop saw If I understand you correctly, you are looking to replace the standard abrasive chop saw with either a freestanding bandsaw that is light and portable or a dry cut saw. 7 Re: Horizontal band saw vs. Dry cut chop saw go with the carbide blade made for steel …. lot less sparks and grinding,but you need a saw that is low rpm around 1400 or vs your cutt off saw witch i prolly 3200- 3600.
I just picked up the makita dry cut, and am loving it. I sold my bandsaw to pay for it, and do not miss it yet. Also the general concensus was the band saw sits other than for big stuff.
dry cut saw vs band saw Related Question:
What is a dry cut saw?
These metal circular saws and chop saws , sometimes referred to as dry cut saws or cold cut saws are a quality and cost effective alternative to standard abrasive chop saws and much safer than reversing the blade on your circular saw for thin metal cutting.
Is a band saw good for cutting wood?
With the correct blade, a band saw can cut wood or metal, in either curves or straight lines. Blades come in a variety of widths and tooth counts. Narrower blades are good for tighter curves, while wider blades are better at straight cuts.
What are the disadvantages of a band saw?
The Disadvantages: A bandsaw is limited to the size pieces you can cut because of the circular blade. With the Speedster Bandsaw and Diamond Laser 3000, the maximum size glass piece is approximately 10 to 12 inches in diameter. 2. It does not take the place of simple cuts.
What is a band saw best for?
Band saws are amazingly versatile tools. They’re primarily used for making curved cuts, resawing boards and ripping rough material. They’re also relatively free of kickback because the blade only moves downward, not out toward the user like the blade on a table saw.
Can you use a wet saw blade dry?
As a rule of thumb, most dry diamond blades can be run wet but on the other hand, you cannot use a wet diamond blade for dry cutting.
How high can a bandsaw cut?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
Can I use metal saw to cut wood?
You can use a metal blade to cut wood. A circular saw blade cut metal in a sluggish rotational speed of 25m/s. They are driven by a motor having high power and an A/C vector drive. They are long lasting and non-reusable.
What are 5 general guidelines for using the band saw?
Never push on back of piece with fingers or thumb. Don’t reach across the blade. Make all cuts under power, not while blade is coasting. Never remove guard unless authorized by Technician or WRL Manager.
What’s the difference between a band saw and a jigsaw?
What is this? Bandsaws are used almost exclusively for re-sawing projects. Jigsaws are, by definition, hand power tools that cut with a reciprocating motion and are generally used to make various curved cuts on thinner material.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
What materials can a bandsaw cut?
Most bandsaws have two wheels rotating in the same plane, one of which is powered. The blade itself can come in a variety of sizes and tooth pitch (teeth per inch, or TPI) which enables the machine to be highly versatile and able to cut a wide variety of materials including wood, metal and plastic.
How thick can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
What is a cold cut saw?
A cold saw is a circular saw designed to cut metal which uses a toothed blade to transfer the heat generated by cutting to the chips created by the saw blade, allowing both the blade and material being cut to remain cool.
How much does a miter saw cost?
A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.
How long do chop saw blades last?
They can last between 12 and 120 hours of continuous use, depending on the quality of the blade and material they’re used to cut.