Running two motors-It is not all that unusual to see machines with two matched electric motors. Clutch comment: the clutch I used, Carlton “PowerFlow” is a shaft hung sheave clutch with two groove sheave for B belts, motor #1 has a three groove sheve, with motor #2 having a single groove same pitch diameter as motor #1. I used BX belts to get full horsepower ratings- one belt from motor #2 to motor #1, two belts from motor #2 to the clutch. I got to thinking of how we converted from a gas engine to electric motor.
I think the electric mill will be cheaper to run than the gas. Even with the added cost of the roto phase, the 3ph mill is less expensive than the diesel engine mill. From contributor B: I thought you were thinking of converting your existing mill to 3ph. For sure, the easiest and most cost-effective way would be to sell your mill and buy a 3ph mill.
I am close to ordering a lm2000 and have been debating building an electric mill. My reasons for liking electric are the economy, low noise and no exhaust factors. I am going to develop a sustainable forestry business where we harvest broken trees and thin the woods to encourage forest growth, provide income from crossties, farm lumber, finished products, and wood chips for the the bio-mass to electric power industry(the future for electric generation around here).
My husband spent a great deal of time researching the reviews and costs of different brands of sawmills before we finally could invest in our own portable bandsaw mill in July 2015. If you are looking to build for yourselves, the sawmill will quickly pay for itself once you start looking at the cost of wood at lumber/hardware stores and comparing it to what you are cutting. The first time we milled, we accidentally hit one of the metal log supports.
Oil capacity: 1.16L. Cast iron cylinder liners provide lasting durability. Oil Sentry automatic low oil engine shutdown system. Standard Track Size: 157″ x 40.5″ ** We have extended track sections if needed.
electric vs gas bandsaw mill Related Question:
Is a bandsaw mill worth it?
A portable sawmill can be worth the investment. It can provide a source of wood for your own projects and give you a side business. For a source of lumber, as well as a profitable business, a portable sawmill can be a key piece of equipment on your farm.
How much electricity does a sawmill use?
Survey responses from 58 Appalachian hardwood sawmills revealed that the electricity consumed per month per mill averaged 220 kWh/MBF, and the average electric bill was $17.78/MBF/mo. Many opportunities exist for sawmills to reduce energy costs and waste in their lumber production.
How fast should a bandsaw mill run?
Bandsaw: Speeds. A common speed for the bandsaw is about one thousand feet per minute. Wood can effectively be cut at much higher speeds, up to and over five thousand feet per minute, but you should keep it slower because it’s safer.
Is owning a sawmill profitable?
It’s true that owning a sawmill can be a very lucrative business venture, and in the right circumstances it is not only possible but very likely to earn you a significant profit on a regular basis. However, it’s worth keeping in mind that building a business with only profit in mind is not sustainable in the long term.
Do dead trees make good lumber?
Yep, it’s worth it. If you sell the wood, you will have to find or create a market. Most that I have sawed has been treated and the bugs killed. Buyers will want to be assured that the wood is bug free.
What are two benefits of using wood as a source of alternative energy?
Wood is easy to store and use, it does not require very much processing, and it is a renewable resource when harvested sustainably. Burning waste wood for fuel eliminates having to put it in landfills. Getting wood is easy for many landowners and rural residents in Wisconsin and other parts of the United States.
Are Norwood sawmills good?
How reliable are Norwood sawmills? Norwood has specialized in engineering and building portable sawmills since 1993. With tens of thousands of Norwoods hard at work in over 100 countries worldwide, they’ve proven that they’re reliable.
Where is Wood Mizer made?
Wood-Mizer is a sawmill manufacturer that also produces sawmill blades. Modern manufacturing facilities in Indianapolis and Batesville, Indiana USA and Kolo, Poland guarantee maximum quality at an affordable price anywhere in the world.
How long does a bandsaw mill blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
What is the best RPM for bandsaw?
Bandsaws always use 1725 rpm. The 3450 rpm are way too fast. From contributor R: Depending on the size of the wheels bandsaw blade speeds can vary between 2000 SFPM to over 4500 SFPM.
How long do Saw Mill Blades last?
Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well.
How long should pine dry before milling?
Depending on the thickness of the lumber and where you live, weather and time of the year, it will take anywhere from 6 weeks to 4 months. Most lumber is in the 1” to 2” thickness and the time above applies to thicknesses. Drying cants, timbers, posts will take considerably longer.
Can you make money selling rough cut lumber?
When you first get a sawmill, the primary ways to make money are selling lumber or cutting for people. However, cutting for people is kind of tricky, because you’ll want to have some experience before you start doing that. If you’re cutting by the board foot and you take your time it doesn’t really matter too much.
Can standing dead trees be used for lumber?
Dead and dying trees can be milled for lumber, but it has to be done within about two years before they rot or become infested with insects.
How much does it cost to mill wood?
The most stable or secure method for pricing for the mill owner is a flat, hourly rate. Rates vary from location to location and range from $65 to $105 per hour plus extra charges for travel, broken blades, etc. Pricing on an hourly basis transfers all of the risk of daily output to the customer.