The three most common textures associated with reclaimed resawn timber and lumber products are circle-sawn, band-sawn and planed. In these cases, the texture generally has reference to the texture on the timber or lumber prior to its initial use Often when discussing the texture of a weathered timber or board, circle-sawn and band-sawn textures are lumped together as “Rough-sawn,” while timbers/boards that were planed prior to initial use are referred to as “Smooth” Note that the distinction between textures can become somewhat blurred over time in that the weathering/aging process can result in rough-sawn textures becoming a bit more smooth and smooth planed textures becoming a bit more rough.
The two most common surface textures used are Rough Sawn and S4S. The Rough Sawn material SWC supplies is often referred to as “Resawn” or “Band Sawn”. Net dimensions vary somewhat by size and source mill, but our material usually run 1/2″ smaller than Rough Sawn material. Price of this material falls between new, unaltered wood and reclaimed material.
IMPACTExterior wood protection is a. non-toxic, eco-friendly Zero VOC waterproofing sealer for all wood, composite decking and concrete and masonry surfaces. TECHNOLOGYRather than applying polymers to wood’s surface, this new class of waterproofers uses nano-particles to penetrate wood’s surface and protect from within! It far and away outperforms traditional products on the market today. DURABILITYExterior sealed wood comes with 2 coats of exterior wood protection, sealed S4S Protection that lasts! Sealer lasts between 6-10 years depending on wood application Dingewood colors provide a revolutionary color system with the water protection from you can rely on.
We recommend the bandsaw finish finish for the majority of projects. Orders placed with mill finish will be full dimension items, however it might have one or more faces with a bandsaw finish if we have to mill the order from larger stock. Here are some beautiful examples to highlight the differences between bandsaw finish and standard mill finish.
Both resawn and rough lumber can have one side rough and one side resawn. Resawn lumber is cut thinner in smaller dimensions than rough lumber, making it more adaptable when used for projects that require flatter boards. Resawn lumber blends into the surface of the structure better than the fuzzy, enhanced or raised-fiber surface of rough lumber.
My experience is that a circular saw is larger heavier and more robust, but produces rougher lumber and has more waste. The band saw also runs off a small engine, where the circular saw runs off a larger diesel. Pulling a log through a saw means you’re also placing boards and slabs to the opposite side of the saw, without having to pull it off the top of a log.
rough sawn vs band saw Related Question:
Is rough sawn lumber better?
As mentioned earlier, rough sawn planks are typically thicker than standard surfaced woods and also heavier. This is due to both the size and the added moisture, making them a good option where strength and sturdiness are concerned. Also, the cost of this type of lumber is generally cheaper by volume as well.
What is the main advantage of buying rough sawn lumber?
Advantages of using rough sawn lumber: It is also thicker than finished wood. It allows the woodworker to have enough wood for a good margin of error, while also saving money. DIY woodworkers and hobbyists prefer rough sawn lumber for their projects as it is economical and they can work with quality wood.
What is the difference between sawn and rough sawn?
The Rough Sawn material SWC supplies is often referred to as “Resawn” or “Band Sawn”. This is because the timbers are cut on a large band saw and have a uniform “fuzzy” finish. Our Rough Sawn material does not have the prominent, circular mill marks associated with large circular saws of older saw mills.
Can you use rough cut lumber for decking?
Another thing that you can build using rough cedar lumber is a deck. While there is rough and smooth cedar available to you, the rough cut allows you to have more control over what it is going to look like in the end. When you build a deck, especially out in the woods, you want it to look rustic.
Can rough cut lumber be used to frame a house?
Rough sawn lumber is a great addition to just about any home. If you’ve decided that your next home project is going to be built around the use of rough sawn, and it’s your first time doing so, then you may have a lot of questions.
What finish should I use on rough cut lumber?
There are many different types of finishes, however, for rough cut pine, an oil-based finish is the best choice. An oil-based finish will ensure that the wood is protected, and gives it a wet look to the wood. There are two finishes that are commonly used on pine, boiled linseed oil, and tung oil.
Is rough sawn timber treated?
The timber has been cut to size with a circular saw and received no further treatment. This will leave the sides and edges of the timber with a rough, unfinished surface where the saw cut through the wood. Due to the simplicity of preparation, rough sawn timber is always cheaper than planed.
What happens to freshly cut or green wood when it dries?
Unseasoned green wood will almost always lead to disaster when it’s used for building fine furniture. As it dries, the wood shrinks, which can cause joints to open. The stock can also distort in a number of ways … none of them good.
What is resawn Douglas fir?
Douglas Fir Rustic – Resawn – Product Info Trestlewood’s Douglas Fir Rustic Resawn Lumber is generally resawn from nature-damaged (fire, insect, etc.) logs or from by-products of sawmill, logging or other wood-processing operations.
What does S2S mean in lumber?
S2S: Surfaced 2 sides, meaning that the rough lumber has been surfaced on the top and the bottom.
What is 4s lumber?
S4S, or lumber surfaced four sides, is another common surfacing option. This refers to boards being planed and in addition also being straight line ripped on two sides resulting in the board being flat, uniformed in thickness and squared up with parallel edges ready for the manufacturing process.
Why is rough sawn lumber more expensive?
thicker than your final dimension in order to account for the material that will be removed by the jointer and planer. Thicker boards cost more per board foot, so you won’t save any money by buying a 2-in. board and resawing it into two 1-in. boards.
Is Rough Cut Lumber true to size?
In reality, these measurements are not a true measurement of the lumber thickness or width. The true measurement of a 2×4 is actually 1.5” thick x3. 5” wide. When the board is first rough sawn from the log, it is a true 2”x4”, but the drying process and planning of the board reduce it to the finished at 1.5”x3.
What does rough mean in lumber?
: lumber that has not been dressed since it was sawed.
How long will rough cut pine last outdoors?
Redwood, Pine and Cedar Pine varieties have a projected life span of only 5 to 10 years.