2.Support the bandsaw blade with your left hand at about 9 o’clock: palm up, fingers below the blade pointing toward 2 o’clock, thumb closing lightly over the top. 3.Hold the other side of the bandsaw blade with your right hand at 3 o’clock: palm down, fingers above the blade pointing left toward 10 o’clock, thumb wrapped lightly beneath. Steps 1-11 will get you 3 coils….for four you need to do the following:To get the 4th loop:Once you have the 3 and before you let go with your left hand, shuffle the loops so that the loop you are holding with your left hand is 2-3 times the diameter of the other loops.
Figuring out how to fold a bandsaw blade is fundamental if you have a band saw in your workshop at home. Next up, we’ll be covering bandsaw blades folding tricks that you have to follow, so you can securely fold and store your bandsaw blades. Presently, you ought to have a unique understanding of how to curl a bandsaw blade, and you should be able to fold them safely without harming yourself or harming the edge.
Our readers have shown us several ways of folding bandsaw blades, here’s one of them. Our readers have shown us several ways of folding bandsaw blades. By the time your hand makes three-quarters to one full revolution, the blade will have popped into three coils.
Hold the other side of the bandsaw blade with your right hand at 3 o’clock: palm down, fingers above the blade pointing left toward 10 o’clock, thumb wrapped lightly beneath. Move your hands toward each other to halve the distance between them, squeezing the blade into an oval. In one motion, push the blade down as you twist your hand a half-turn.
In terms of folding your bandsaw blade into 4 different loops, you need to go through the same process. There is huge info about how to fold a bandsaw mill blade. Here are a few tips on How to roll and tension a bandsaw blade to help you out during storage.
how to fold a bandsaw blade into four loops Related Question:
Can you flip a bandsaw blade inside out?
Just turn them inside out, it doesn’t make any difference. The only difference is what side they had up when they welded them. When I get blades from WM, they are ready to go on the mill.