Bandsaw blades don’t last forever, but they are durable and can take on quite the workload. I wanted to learn more about how long these blades should last and how to extend the life of your blade. Keep reading below to discover more about how long your bandsaw blade should last. How long a bandsaw lasts depends mainly on the materials the band saw is used to cut, the condition of the blade and the bandsaw machine itself, how the materials are fed to the saw, frequency of usage, and maintenance.
How long a blade last depends on how dirty the logs are. Don’t get tunnel vision just by reading what the info says about how long a blade will last. For the most part most blades will get the job done, some faster and some slower, the blades you have described should get you close to 1000 bdft, there might be some waving with knots, but this will happen regardless of blades.
A common question new sawyers ask is how much life they can expect from a band saw blade. First, the band saw blade is an amazing combination of steel alloys, precision sharpening, heat treating, and welding. The harder the wood, the shorter the time between blade changes-not only because hard woods tend to dull the blade more quickly, but also because it takes a sharper blade to slice through it.
Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well. Others think that if you want your new blade to last as long as it can, investing in a higher-quality blade will be worth it in the long run. How you use your blade does make a difference in how long the blade should last.
Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well. Return your sawmill blades to one of our Wood-Mizer ReSharp locations and we won’t just sharpen your blades – we will return them to original manufacturing standards for as little as $8.25 per sawmill blade. How to tell when your bandsaw blade is nearing the end of its life.
The knots in pine until you figure them out will cause the blade to dip or wavy cuts keep the blades clean of pitch and slow down a few inches before you get to the knots once in the knot you can speed back up. Some of my blades have less set than others because in hard wood to much set is hard on the blades and I don’t keep them separate so in green wood less set may slow them down. Have been sawing pretty steady, but not near what you had going through that many blades.
From contributor D: I run my blades about two clock hours but like the others, I can tell by the way my mill cuts and sounds if the blade is getting dull. On the average I would be ready to change blades after the third log. My mill is homebuilt and it’s a 2 minute change out on the blade so although it may not be advantageous for you to swap blades, for me it might be.
how long do bandsaw sawmill blades last Related Question:
When should I change my sawmill blade?
When operating a band sawmill, a general rule is to replace the bandsaw blade with a sharpened one on average every 1,5 hours of cutting. In the case of cutting dirty wood, this time will be shorter.
How long does a sawmill blade last?
Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well.
How many times can you sharpen a sawmill blade?
You should be able to sharpen your blade two or three times before needing to replace it, but sometimes breakage happens. Blade breakage can result from a range of situations. Common causes of blade breakage include: Dull teeth.
How do you know when a sawmill blade is dull?
Re: How do you determine its time to change out blade. When blade came out of log the carriage would pick up speed. Dulling on tips of teeth. New blades will cut straight when dull, as you said just slow. That is one sign of needing to be changed.
How long should a bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
How tight should a blade be on a bandsaw mill?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
Are bandsaw blades worth sharpening?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.
What allows a saw blade to last longer?
Hang Circular Saw Blades Through the Center Hole Don’t let the blade’s kerf rest on the ground but hang a blade through its center hole for temporary storage. This can be as simple as a nail or screw in the wall, but at least the blade won’t be dulled by the floor or a shelf.
Can a bandsaw blade be sharpened?
If you’re looking to sharpen your band saw blade, you have two options: manually sharpen the blade yourself or use a mechanical sharpening machine.
Do band saw blades get dull?
It happens from time to time. A blade seems suddenly to dull and then the drift. You should have ordered more in but you procrastinated and when you need a reasonably sharp blade you’re out.
How long does a wood Mizer saw blade last?
Most blades give me at least 10-12 hours running time. That would be 5-6 sharpenings. In 2-3 hours I average 400-500 board feet depending on log size and lumber size (4/4, 5/4 etc.).
Why do bandsaw blades break?
Machine Defects Even the best blades can fail if there is something else wrong with your bandsaw, and even a small misalignment of bearings or guides can put a twist in the blade as it goes around. Resulting in tension being applied in all the wrong ways which will lead to early breakage.
How long does a metal cutting blade last?
No matter how much care you give to your blade, a time eventually comes when it needs to be changed. On average, a typical cold saw blade should last at least six months. Damaged teeth.
What causes bandsaw blade drift?
Drift is cause because the blade buckles under the load. You can see that by stretching a ribbon between 2 points and applying a pressure to one of the edges, it will turn sideway easily. A sharp blade and high blade speed will help a lot with that.
Why does my bandsaw blade wobble?
The blade on a saw left idle for long periods of time can leave an impression in the rubber tire which might cause erratic tracking. Purchase and install aftermarket replacement tires. (Search for “bandsaw tire” at woodcraft.com.) If you still see a back-and-forth motion, the culprit is probably the wheel itself.