A high-quality band saw may be able to meet or exceed performance expectations that previously were achievable only with a circular cold saw. If you can cut pieces in layers, then a band saw can compete nicely with the volume throughput of a circular cold saw. In comparing a fully automatic band saw to a fully automatic circular cold saw, generally speaking a band saw costs significantly less than a circular cold saw.
A band saw gives a larger cutting capacity, whereas a cold saw limits your cutting capacity. While the initial price of a cold saw blade may be higher than a band saw blade, it’s important to remember that a cold saw blade can be re-sharpened. At SEPCO, we provide a band saw cutting and precision cold cutting saws that are both accurate and fast.
10-29-2009, 08:58 PM #1 Cold Saw Vs. Band Saw Right now the only saw I have is a chop saw and that thing sucks. Not true if the cold saw is semi auto type…which is the only type to buy really…a manual cold saw is a silly choice, unless it’s a non ferrous type, in which case it cuts so fast that manual use is ok. A manual cold saw uses round, HSS blades, that can be resharpened over and over and over again- I have cold saw blades that are ten years old.
The band saw type can be either hozontal or vertically oriented – I’ll get to that shortly. The main advantage of the horizontal cutt-off saw is they don’t have the hub assembly to worry about, but rather have a bridge that generally allows larger workpieces to be cut. CAUTION – because the parts will usually be hand held, you need to take a lot more care, as any saw will take fingers, thumbs even, in some unfortunate cases, hands off without even slowing down – they’re used a lot in meat processing partly because of that.
The most important difference between cold saws and band saws is the amount of burr on the cuts that they produce. A band saw can give you good quality cuts, but can’t match the smoothness of results from a cold saw. Due to their straight blades, band saws also cut material more quickly than comparable cold saws.
I personally wouldn’t prefer a dry cut type saw as I prefer the quiet, controlled chip dropping of the bandsaw. You also won’t be limited on cutting larger solid stock like you would be on the dry cut. On an entry level metal bandsaw don’t worry about the need for coolant, everything I’ve cut is cool to the touch coming off the saw.
bandsaw or cold cut saw Related Question:
Which is better a bandsaw or a scroll saw?
If you want to make fine detail cuts, inside cuts, make patterns and letters, and you want to do so on smaller pieces of wood, the scroll saw is what you want to go with. However, for large, straight, and aggressive cuts on larger pieces of wood, and even metals, the band saw is the way to go.
What are the disadvantages of a band saw?
The Disadvantages: A bandsaw is limited to the size pieces you can cut because of the circular blade. With the Speedster Bandsaw and Diamond Laser 3000, the maximum size glass piece is approximately 10 to 12 inches in diameter. 2. It does not take the place of simple cuts.
What is a cold saw used for?
A cold saw is a circular saw designed to cut metal which uses a toothed blade to transfer the heat generated by cutting to the chips created by the saw blade, allowing both the blade and material being cut to remain cool.
Is a band saw good for cutting wood?
With the correct blade, a band saw can cut wood or metal, in either curves or straight lines. Blades come in a variety of widths and tooth counts. Narrower blades are good for tighter curves, while wider blades are better at straight cuts.
Do I need a scroll saw if I have a bandsaw?
If you are making a jigsaw puzzle for your children, there is no question that you will need a scroll saw and not a band saw. Very detailed and intricate work will not go as well with the band saw. If you are a person that likes crafting and ornate projects, the scroll saw is going to be a much better choice.
What is a band saw good for?
A band saw can be used to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. The most common use for the band saw, however, is in cutting irregular shapes. The second most common use is in resawing or ripping lumber into thinner slabs.
What are the pros and cons of a bandsaw versus a table saw?
Versatile: You can cut wood, MDF, plastic, plywood, metal, and meat. Quiet: Compared to a table saw, a band saw produces much less noise. Clean: The thinner blade produces less kerf. Safer:: Band saw injuries represent just 11.5% of all reported saw injuries from 1984 to 2017.
Can a bandsaw replace a table saw?
In general, bandsaws excel at making curved cuts which allows them to replace some of the basic features of a scroll saw. The creative angles they are capable of creating simply cannot be replicated by the large, circular blade of a table saw. Bandsaws also tend to offer more versatility.
What are 5 general guidelines for using the band saw?
Never push on back of piece with fingers or thumb. Don’t reach across the blade. Make all cuts under power, not while blade is coasting. Never remove guard unless authorized by Technician or WRL Manager.
What are the disadvantages of a cold saw?
Another downside to cold saws is that the hardness makes the saw blades brittle and subject to shock. Any amount of vibration — for example, from insufficient clamping of the part or the wrong feed rate — can easily damage the saw teeth.
Why is it called a cold cut saw?
Cold saws don’t require flood coolant because the heat generated by the cutting action is transferred to the chips. The chips are ejected by centrifugal forces of the rotating blade. This process allows both the blade and the cut material to remain cool, hence the name “cold saws”—but beware of the chips.
What is the difference in a cold saw and a abrasive chop saw?
The cold saw has a toothed, high speed steel blade where a chop saw only has an abrasive wheel. The best part of an HSS blade is that it can be re-sharpened.
What materials can a bandsaw cut?
Most bandsaws have two wheels rotating in the same plane, one of which is powered. The blade itself can come in a variety of sizes and tooth pitch (teeth per inch, or TPI) which enables the machine to be highly versatile and able to cut a wide variety of materials including wood, metal and plastic.
How high can a bandsaw cut?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
Do I really need a scroll saw?
So, unless you’re about to start a project requiring the precision of a scroll saw, such as intarsia (wood mosaic) projects or wooden children’s toys and puzzles, you don’t need one. If you are a tool junkie or experimental woodworker, if you don’t already own one, a scroll saw is probably already on your wish list.