There sharpener & setter is $1390 Canadian & I saw another system at linnlumber.com for $900. US for the pair, that is $1112. The Woodmizer sharpener and Cook’s sharpener are of the same basic designs. Hi Gord: We at Clarke Sawmills in Lindsay have a great sharpener and setter system we use for are customers needs.
Early in my career, when a new saw blade dulled and started to cut waves, I would try things like adding tension to the blade, slowing down my feed rate or even adjusting my blade guides. If I could just get an edge back, I could keep cutting with the same blade and not have to mess with sending the blade off to be sharpened, and I would save $7. So, off I went, looking for a way to sharpen blades on my own. First off, no matter how good you get with the sander, the blade will not be as good as a new one or one that has had a full factory grind and set because this grinding is changing the geometry of the already finicky blade.
bandsaw blade sharpener reviews Related Question:
Is it worth sharpening a bandsaw blade?
But the only way to ensure the functionality of your band saw and the quality of your final product is through using sharp band saw blades. It often makes sense to replace a dull blade with a new one, but you can sometimes get the best value out of merely sharpening an old blade instead of replacing it altogether.
How many times can you sharpen a bandsaw blade?
You should be able to sharpen your blade two or three times before needing to replace it, but sometimes breakage happens. Blade breakage can result from a range of situations. Common causes of blade breakage include: Dull teeth.
How long do bandsaw blades last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
How long do portable sawmill blades last?
Some can last under six months, and some can last years! Some of the most important variables to consider are what you are cutting, the condition of the machine and blade, how long you are using the blade, and even how you are feeding the wood through your saw as well.
How often do you have to change blade on a sawmill?
When operating a band sawmill, a general rule is to replace the bandsaw blade with a sharpened one on average every 1,5 hours of cutting. In the case of cutting dirty wood, this time will be shorter.
Why do my bandsaw blades keep breaking?
Machine Defects Even the best blades can fail if there is something else wrong with your bandsaw, and even a small misalignment of bearings or guides can put a twist in the blade as it goes around. Resulting in tension being applied in all the wrong ways which will lead to early breakage.
Why are my bandsaw cuts wavy?
The clasic cause for wavy lumber is pushing a dull blade past it’s limits. Sharp don’t get it.
How tight should my bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in. blade, I would set the scale to 1/2 in.
Why are my sawmill blades breaking?
It is essential that the rollers are in good condition without any traces of wear, such as deformation (cone shape), damaged bearings, worn-out roller flange. Worn rollers cause the sawblade vibration and unstable work in the wood, which will lead eventually to a breakage. If the rollers are worn out, replace them.
What allows a saw blade to last longer?
Hang Circular Saw Blades Through the Center Hole Don’t let the blade’s kerf rest on the ground but hang a blade through its center hole for temporary storage. This can be as simple as a nail or screw in the wall, but at least the blade won’t be dulled by the floor or a shelf.
How long does a metal cutting blade last?
No matter how much care you give to your blade, a time eventually comes when it needs to be changed. On average, a typical cold saw blade should last at least six months. Damaged teeth.