Shipping & Returns Learn more about policies and international shipping. Learn More Customer Care Talk to a friendly customer care representative to help with your purchase. 1-800-225-1153 Talk to an Expert Get advice on the latest products and help with your projects.
“This is by far the best resaw blade I’ve ever owned yet. Laguna really sets the bar for things and not a lot of brands come close. The carbide tips alow this blade to be sharpened several times as well. This blade cut through some very hard stabilized red mallee burl I have that is 13 1/2” thick just like a hot knife through butter and didn’t even flinch. It leaves a cutting surface that barely needs sanding afterwards too. It states that 1/8th inch slices can be cut but, I managed to do 1/16th inch cuts with absolutely no problems at all.
Access to this page has been denied because we believe you are using automation tools to browse the website. Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading.
bandsaw blade resaw king Related Question:
What type of bandsaw blade is best for Resawing?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
Can bandsaw blades be resharpened?
There are two basic ways to sharpen bandsaw blades, mechanically, with the use of a machine, or machines designed to sharpen and reset bands, and manually, with the use of hand tools, or hand power tools.
What is M42 bandsaw blade?
The MARATHON® M42 is the ultimate economic band saw blade and stands for a broad application spectrum at a consistently high quality. The high-quality features of MARATHON are now even more flexible thanks to the expansion of the product range, for use with smaller diameters and profiles to large full materials.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
Can any bandsaw resaw?
Just about any bandsaw will do acceptable resawing. For example, all the cuts made in this story were done on an inexpensive, 14-in. bandsaw with a 3/4-hp motor. All we did to the saw was add a riser block to increase its capacity.
How many teeth do you need to resaw a blade?
Typically, a wide 3-tooth-per-inch (tpi) blade provides the perfect blend of aggressive yet smooth cut and sawdust evacuation that resawing requires.
How many times can a bandsaw blade be sharpened?
It often makes sense to replace a dull blade with a new one, but you can sometimes get the best value out of merely sharpening an old blade instead of replacing it altogether. You should typically be able to get two to three sharpenings before you need to change your blade completely.
How long do bandsaw blades last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
How do I choose a resaw blade?
For resawing, use the widest 3-tpi skip- or variable-tooth blade your saw accepts. Typically, the wider the blade, the straighter it cuts. Cutting green (undried) wood requires the widest 2–3-tpi skip-tooth blade your saw accepts.
How tight should my bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in. blade, I would set the scale to 1/2 in.
Can a band saw cut curves?
Whether it’s a tight curve or a closed opening, you can cut it on your band saw with a couple of easy tricks. Cutting on the band saw can be the same thing. The narrower the blade, the tighter the spots you can cut; in fact, some band saw blades rival a scroll saw for cutting tight curves.
What size bandsaw do I need for resawing?
To get started with resawing, I recommend a band saw of sufficient power and with a large depth of cut. Any motor smaller than 1hp and depth of cut less than 10″ will limit your effectiveness. (Some 14″ band saws have about a 6″ maximum cutso you’d be limited to a 12″ wide book-matched panel or less.)
How much horsepower do you need to resaw?
A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
How thick can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
Is it worth sharpening bandsaw blades?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.