For cutting out bowl blanks and rough resawing, you want a bimetal blade. This is the same blade that the protable bandsaw mills use. The Carbide tipped blades are for cutting veneers, and fancy resawing of boards that you want to bookmatch for flat work.
07-27-2012, 5:52 AM #3 Suffolk machine, who makes timberwolf blades, has a blade designed for cutting green wood as well. I’ve always been happy with the timberwolf blades I’ve used, but have not used the green wood blade. 07-27-2012, 9:11 AM #8 I use a 3/8″ 3tpi, raker set blade.
For resawing, the width of the blade should be close to the maximum the bandsaw will handle. On one forum, one person had great results with the Laguna Resaw King, but another person’s Resaw King blade broke, and Laguna said it was his fault for excess tension, even though they had refused to specify the recommended tension. Most bandsaw gauges don’t specify what thickness blade they are calibrated for, which is why they may be perfect for one blade, but are often misleading for other blades.
Premium blades have hardened teeth, and they far outlast ordinary blades. We tested all the premium resaw blades we could find that can safely be used on a 14-in. If you do a lot of resawing, you may find bi-metal blades worth the extra money because the extra-hard teeth are designed to outlast hardened carbon-steel blades.
A bandsaw will make many cuts with precision and speed-when equipped with the right blade for the application. Bandsaw blades differ in thickness, width, length, and tooth configuration. Every time you change from one bandsaw blade width to another, you have to reset the saw’s tracking, tension, and blade guides.
I’m a fan of Timberwolf blades and their website offers various blades for green wood, resawing, and nearly all types of cuts. Have your say… Forum Topics Woodworking Skill ShareYour woodworking skills are displayed for several lifetimes in each project. Show us your jigs, share your tips, strategies and, of c… 1908 Wood & LumberDifferent wood requires different woodworking strategies – from cutting to finishing.
I have been using the 105″ Woodslicer blade which performs OK. Unfortunately, I tried resawing some green logs today and the blade hadlots of problems with binding and warping. I once went to a wood show and bought a Timberwolf blade because I had heard good things about it. I sometimes use both blades to cut green wood but not all that often.
best bandsaw blade for resawing green wood Related Question:
What type of bandsaw blade is best for resawing?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
What size band saw for resawing?
To get started with resawing, I recommend a band saw of sufficient power and with a large depth of cut. Any motor smaller than 1hp and depth of cut less than 10″ will limit your effectiveness. (Some 14″ band saws have about a 6″ maximum cutso you’d be limited to a 12″ wide book-matched panel or less.)
How do I choose a resaw blade?
For resawing, use the widest 3-tpi skip- or variable-tooth blade your saw accepts. Typically, the wider the blade, the straighter it cuts. Cutting green (undried) wood requires the widest 2–3-tpi skip-tooth blade your saw accepts.
How many teeth do you need to resaw a blade?
Typically, a wide 3-tooth-per-inch (tpi) blade provides the perfect blend of aggressive yet smooth cut and sawdust evacuation that resawing requires.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
Can I put a wider blade on my bandsaw?
An 18-inch diameter wheel can use a 0.032-inch thick blade that is 3/4 inch wide. In general, thicker and wider blades will be the choice when sawing dense wood and woods with hard knots. Such wood needs the extra strength of a thicker, wide blade to avoid breaking. Thicker blades also deflect less when resawing.
How much horsepower do you need to resaw?
A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
How do I know what size bandsaw blade I need?
In inches, determine the radius of each wheel, by measuring from the center to the outside of the wheel. Apply the following formula: (R1 x 3.1416) + (R2 x 3.1416) + (2 x C) = Saw blade length. Put a strip of tape on the floor to mark a starting point.
How tight should my bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in. blade, I would set the scale to 1/2 in.
How do I choose a bandsaw blade?
Use coarse tooth blades (2 or 3 TPI) for re-sawing and cutting thicker materials. For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
What causes bandsaw blade drift?
Drift is cause because the blade buckles under the load. You can see that by stretching a ribbon between 2 points and applying a pressure to one of the edges, it will turn sideway easily. A sharp blade and high blade speed will help a lot with that.
What does the term resawing mean?
transitive verb. : to saw (something) again resawing reclaimed wood built from resawn lumber.
What is resawing lumber?
Re-sawing, the process of cutting a board into thinner pieces of the same length and width, opens up a world of woodworking opportunities. Re-sawing allows you to create wide panels from narrow boards, thin pliable pieces for bent laminations, thin sheets of veneer, and even turn logs into lumber.
How thick can a 9 inch bandsaw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
Why is my bandsaw burning the wood?
A majority of issues with wood burning is because of a dull saw blade. These blades may not be sharp enough to efficiently cut the wood, and thus create enough friction to heat and burn the wood. What is this? Dull blades make it more challenging to cut, which causes friction as you pass the wood through.