Our readers have shown us several ways of folding bandsaw blades, here’s one of them. Our readers have shown us several ways of folding bandsaw blades. By the time your hand makes three-quarters to one full revolution, the blade will have popped into three coils.
I must admit, when I know someone is watching that hasn’t seen me fold up a bandsaw blade before, I do it extra fast and super snappy to make it seem even more dazzling. I learned how to coil a bandsaw blade like this pre-YouTube and over the phone from the kids at Wood-Mizer, who supply and sharpen my blades. From there, whip the portion of the blade furthest from you towards the ground and just as the blade nears the ground give it a quick jerk up, with a snap.
You may be looking at the blade wondering how it’s possible to fold – but we’ve made it easy to follow for you, so you’ll be storing your bandsaw blades safely in the future. Bandsaw blades are incredibly durable, so folding a bandsaw blade will not break or damage the blade in any way. The Round-Up. Now, you should have a greater understanding of how to fold bandsaw blades, and you should be able to fold them safely without injuring yourself or damaging the blade.
Figuring out how to fold a bandsaw blade is fundamental if you have a band saw in your workshop at home. Next up, we’ll be covering bandsaw blades folding tricks that you have to follow, so you can securely fold and store your bandsaw blades. Presently, you ought to have a unique understanding of how to curl a bandsaw blade, and you should be able to fold them safely without harming yourself or harming the edge.
The bandsaw blade needs lots of attention to fold or unfold as the blade is made of metal. If you are new at the bandsaw blade folding, you must learn the basics to fold the saw blade for the first time. Hold the Blade in Front of You: Hold the blade with your 2 hands and set the bottom of the blade on a level surface.
how to properly fold a bandsaw blade Related Question:
Can you flip a bandsaw blade inside out?
Just turn them inside out, it doesn’t make any difference. The only difference is what side they had up when they welded them. When I get blades from WM, they are ready to go on the mill.
How much tension should a bandsaw blade have?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
Why won’t my bandsaw cut straight?
Band Saw: Why won’t my band saw cut straight? When the band saw cuts crooked, a dull blade, improper feeding, loose blade tension or not using a work piece guide could be the cause. Use the rip fence or miter gauge to guide the work piece uniformly through the cutting blade to make straight cuts.
Why do bandsaws wander?
If the wheels are worn and do not have a distinct top to the crown then the blade will not know where to go, and may wander around. This of course can cause poor cut quality and difficulty in setting the guides.
What is bandsaw blade drift?
Most band saw blades tend to veer slightly to the left or right when cutting. This is known as blade drift. The amount of drift varies with every blade, but you can compensate for it by clamping your fence to match the drift angle.